|
: anyone ever swapped in a toy axle RYJAY 03-13-2002, 10:58 AM Found a yota rear with 4.10's for only 75$CDN.... anyone ever tossed one under a YJ? anyone know width? biggest problem with be driveshaft-pinion... I wonder is they sell bronco/toy capsized u-jounts :o HighHooder 03-13-2002, 11:19 AM you need to check out Brandon's M38a1 ;) try a search;) AndrewH 03-13-2002, 01:26 PM not tto sure ont eh width but don't forget they are 6 bolt not 5 on 4.5. so you would need to swap another diff in the front or else you will need 2 spares. RYJAY 03-13-2002, 01:43 PM i've heard macihine shops can redrill the flanges getting the 5 on 4.5 and solving the problem of having to buy new rims anyone ever done this? or know if it possible DozerDan 03-13-2002, 02:03 PM Yeah its possible. I am doing it. Go do a search. and go look in the yota section. I have 2 treads FULL of info on them. axle confirmation and putting a yota axle in my heep. Go look. If it is from a 86 or newer it is 58" wide DRM 03-13-2002, 05:56 PM For one thing, that Toy axle is either 55.5" or 58.5" wide - a few inches more narrow than your stock YJ axles.... | |