What you think I have it to post???:flipoff2:
I just think it would be a good idea to get a good parts list (including part#s) in one place. Maybe if it was thorough enough, Lance would put it in the tech section.
SO all you people with the knowledge of parts/part #s and maybe even what years had what, please post them. :D

Do you mean upgrades like 35 spline outers or just seal and bearing #'s?

Go to www.coloradok5.com They have an entire manual that you can print for yourself.

and www.gohumvee.com has seal and bearing pn's

I was thinking of a whole list of parts, 35 splines included, but organized. For example:
Axles
inner axle 30 spline #
inner axle 35 spline #
outer axle 30 spline #
outer axle 35 spline #
Bearings

You get the idea? Everyones always asking for the # for this or that, so let's put it on a list. When everything is here, then someone or myself can compile the list.:D

I have the manual that is on CK5, BUT it does not list PART #s. It lists part #s for the specialty tools, but not for parts. :)

60 KNUCKLE REBUILD PARTS
kingpin spicer part number 37302
lower bearing kit spicer 706395x( includes bearing ,race,dust
shield and seal for upper king pin.
upper king pin bushing spicer part number 41886
upper seal kit spicer part number 620058( really you will not
need to buy this seal if you buy the lower bearing kit because it is in it).
upper bearing gasket 37307

35 spline "outter" is Spicer PN3-82-871

Maybe this will help you Andy.....:beer: :p :p :D

Axles
inner axle 30 spline part#
inner axle 35 spline part#
outer axle 30 spline part#
outer axle 35 spline part# 3-82-871
Bearings

Knuckle Rebuild Parts
kingpin spicer part# 37302
lower bearing kit part# 706395x( includes bearing ,race,dust
shield and seal for upper king pin.
upper king pin bushing part# 41886
upper seal kit part# 620058( really you will not need to buy this seal if you buy the lower bearing kit because it is in it).
upper bearing gasket part# 37307

Thanks Shaker.
If anyone else has part numbers to add just copy the text above in your reply and add the info.:D

Axles
inner axle 30 spline part#
inner axle 35 spline part#
outer axle 30 spline part#
outer axle 35 spline part# 3-82-871
u joint greaseable Spicer spl55-4x

Bearings
inner seal Nat 415960 - 2.75x3.876x0.375
inner bearing Tim 387A
inner race Tim 382A
outer bearing Tim LM104949
outer race Tim LM104911

Knuckle Rebuild Parts
kingpin spicer part# 37302
lower bearing kit part# 706395x (includes bearing ,race,dust shield and seal for upper king pin)
upper king pin bushing part# 41886
upper seal kit part# 620058 (really you will not need to buy this seal if you buy the lower bearing kit because it is in it)
upper bearing gasket part# 37307


Warn hubs
main body retainer ring DAE RR0375 internal spirolok
main body assembly M256 pn 13109
hardware kit M256 pn 35150 (dial screws and shaft snap ring)

34643 SLINGER - PINION BEARING INNER
706046X INNER PINION BEARING KIT
706375X KIT - DIFF & PINION ADJ SHIM
30982 BAFFLE - PINION BEARING
706359X KIT - PINION BRG ADJ SHIM
706045X OUTER PINION BEARING KIT
42737 THRUSTWASHER - BEARING
42449 SEAL - PINION
2-4-3801X END YOKE ASSEMBLY (INC 10)
34592 SLINGER - END YOKE
30275 WASHER - PINION NUT
30271 NUT - PINION
34822 BOLT - CARRIER COVER (QTY 10
34687 GASKET - CARRIER COVER
48632-1 BOLT - DIFFERENTIAL BEARING CA
706047X DIFFERENTIAL BEARING KIT
706378X KIT - DIFF BRG ADJ SHIM
30266 BOLT - DRIVE GEAR (QTY 12)
34367 PINION
34729 THRUST WASHER
34730 THRUST WASHER
44810 LOCK - DIFFERENTIAL SHAFT
30263 DIFF SHAFT
36487 SEAL & GUIDE TUBE
706395X KIT - KING PIN PARTS
620058 SEAL - KING PIN - UPPER
37305 RETAINER - GREASE
706150X KIT - BEARING - KING PIN - L
41777 SEAL - OIL
31026-1 SCREW - STOP
500381-3 NUT - HEX SLOTTED
500381-3 .375-24 HEX NUT
500175-1 FITTING - LUBRICATION
30875 NUT - HEX TAPERED
38139 ARM - STEERING (LH ONLY)
620132 CAP - KING PIN - UPPER (RH ONL
37307 GASKET - KING PIN CAP
37300 SPRING - PRESSURE
620180 GEAR
41886 BUSHING - KING PIN
37302 PIN - KING
72837X KIT - RIGHT KNUCKLE ASSY (49,
72838X KIT - LEFT KNUCKLE ASSY (50, 5
41893 RIGHT KNUCKLE
41894 LEFT KNUCKLE
37879 BOLT - HEX
37299 CAP - KING PIN BEARING LOWER
500357-13 LOCKWASHER (KING PIN CAP - LOW
500412-13 BOLT - HEX (KING PIN CAP - LOW
37308 SLINGER
700014 KIT - SPINDLE SEAL & BEARING
37311 SEAL - OIL
37312 SPACER - WHEEL BEARING SPINDLE
620062 SEAL - NEEDLE BEARING
620063 NEEDLE BEARING - SPINDLE
36880 NUT - BRAKE MOUNTING
48816 SEAL - GREASE
706411X INNER WHEEL BEARING
706074X INNER WHEEL BEARING KIT
35830 GEAR, TRAC-LOK
707083X KIT - DIFF PLATE & DISC (T/L)
40835 CLIP - DIFF CLUTCH RETAINER

Thanks mj, thats quite a bit. :D
I Compiled it a little, but it is time for me to go home, drink :beer: and work on the truck. So I will see you guys next week.
Feel free to copy/paste and add to it, or correct my spelling. :emb:

Axles
inner axle 30 spline part#
inner axle 35 spline part#
outer axle 30 spline part#
outer axle 35 spline part# 3-82-871
u joint greaseable Spicer spl55-4x

Bearings
inner seal Nat 415960 - 2.75x3.876x0.375
inner bearing Tim 387A
inner race Tim 382A
outer bearing Tim LM104949
outer race Tim LM104911

Knuckle Rebuild Parts
kingpin spicer part# 37302
lower bearing kit part# 706395x (includes bearing ,race,dust shield and seal for upper king pin)
upper king pin bushing part# 41886
upper seal kit part# 620058 (really you will not need to buy this seal if you buy the lower bearing kit because it is in it)
upper bearing gasket part# 37307

Pinion/Diff Parts
SLINGER - PINION BEARING INNER part# 34643
INNER PINION BEARING KIT part# 706046X
BAFFLE - PINION BEARING part# 30982
KIT - PINION BRG ADJ SHIM part# 706359X
OUTER PINION BEARING KIT part# 706045X
SEAL – PINION part# 42449
WASHER - PINION NUT part# 30275
NUT – PINION part# 30271
PINION part# 34367
KIT - DIFF & PINION ADJ SHIM part# 706375X
THRUSTWASHER – BEARING part# 42737
END YOKE ASSEMBLY (INC 10) part# 2-4-3801X
SLINGER - END YOKE part# 34592
BOLT - CARRIER COVER (QTY 10) part# 34822
GASKET - CARRIER COVER part# 34687
BOLT - DIFFERENTIAL BEARING CAP part# 48632-1
DIFFERENTIAL BEARING KIT part# 706047X
KIT - DIFF BRG ADJ SHIM part# 706378X
BOLT - DRIVE GEAR (QTY 12) part# 30266
THRUST WASHER part# 34729
THRUST WASHER part# 34730
LOCK - DIFFERENTIAL SHAFT part# 44810
DIFF SHAFT part# 30263

Warn hubs
main body retainer ring DAE RR0375 internal spirolok
main body assembly M256 pn 13109
hardware kit M256 pn 35150 (dial screws and shaft snap ring)

MISC
36487 SEAL & GUIDE TUBE
706395X KIT - KING PIN PARTS
620058 SEAL - KING PIN - UPPER
37305 RETAINER - GREASE
706150X KIT - BEARING - KING PIN - L
41777 SEAL - OIL
31026-1 SCREW - STOP
500381-3 NUT - HEX SLOTTED
500381-3 .375-24 HEX NUT
500175-1 FITTING - LUBRICATION
30875 NUT - HEX TAPERED
38139 ARM - STEERING (LH ONLY)
620132 CAP - KING PIN - UPPER (RH ONL
37307 GASKET - KING PIN CAP
37300 SPRING - PRESSURE
620180 GEAR
41886 BUSHING - KING PIN
37302 PIN - KING
72837X KIT - RIGHT KNUCKLE ASSY (49,
72838X KIT - LEFT KNUCKLE ASSY (50, 5
41893 RIGHT KNUCKLE
41894 LEFT KNUCKLE
37879 BOLT - HEX
37299 CAP - KING PIN BEARING LOWER
500357-13 LOCKWASHER (KING PIN CAP - LOW
500412-13 BOLT - HEX (KING PIN CAP - LOW
37308 SLINGER
700014 KIT - SPINDLE SEAL & BEARING
37311 SEAL - OIL
37312 SPACER - WHEEL BEARING SPINDLE
620062 SEAL - NEEDLE BEARING
620063 NEEDLE BEARING - SPINDLE
36880 NUT - BRAKE MOUNTING
48816 SEAL - GREASE
706411X INNER WHEEL BEARING
706074X INNER WHEEL BEARING KIT
35830 GEAR, TRAC-LOK
707083X KIT - DIFF PLATE & DISC (T/L)
40835 CLIP - DIFF CLUTCH RETAINER

its a good idea
we should do the same for sm465 np205 np203 10bolt dana44
prices and internet/mailorder sources added would be sweet

Where are the cheepest places to get 35 spline outers and how much?:roxy:

I think you're probably hosed on the 60" width; there's not a lot out there that'll let you get that narrow.

But, that said... here goes. These part numbers are from Randy's Ring-n-Pinion, BTW... so if you order direct, please mention who tossed out the part numbers.

All the lengths are center of joint to end of splines, also.

DAN660182-1 is 15.96", no application noted.
DAN660182-10 is 34.56", '78-79 F350 Sno-Fighter
DAN660182-11 is 18.7", '78-79 F350 Sno-Fighter
DAN660182-36 is 36.68", '85-88 F350
DAN660182-5 is 17.67", '77-91.5 GM
DAN660182-6 is 35.1", '80-86 GM
DAN76660-1X is 16.17", Left hand inner, unknown app (might be a different U-joint too)
DAN76660-2X is 36.97", unknown app (probably same truck the last one)

DAN3-82-871 is the 35 spline outer stub shaft.
Warn 38786 is the 35 spline locking hubs. (Randy's doesn't do hubs)

FYI, the 17.67 and 35.1 are the stock axles in a Chevy D60F. That is 69" WMS, so you might be able to weasel about an inch and a half out of it by using the 15.96" shaft, but that's only gonna get you down to 67.5ish.


__________________
--scott
http://www.rockstomper.com

The part listed above: 30875 NUT - HEX TAPERED Is that the four nuts that screw onto the studs that pass through the stock high-steer arm? I need to know, because I am building arms using the king pin D60 and have tapered the tops of the holes to look like the factory arm. Now I need the tapered nuts ordered from GM.
So is that the right one so I can order more of them?

Thanks,
Phil Jensen

Bump because I really feel this thread should be a sticky.

gona link it into the axle info sticky right now....

http://www.pirate4x4.com/tech/billavista/60_front/index.html

didn't see it listed