|
: Explorer 8.8 width, dust shield to dust shield?? Backing plate to backing plate? Po' riggity 03-13-2002, 11:29 PM Quick, I need to find out if some hard lines I can get from an 8.8 will work on the 8.8 that I have going in on the 30th of this month, I need a measurement from the backing plate/dust shield on the back of the rotor, from drivers side, to passenger side... anyone know it? Scott Po' riggity 03-14-2002, 12:54 AM BTT for the evening before I go to bed.. Scott GFI 03-14-2002, 01:07 AM :flipoff2: :flipoff2: :flipoff2: :flipoff2: Don't know! GFI 03-14-2002, 01:07 AM :) Just having fun! Po' riggity 03-14-2002, 02:05 AM So, you are the "GOD" of suspension>.... MORON... :rolleyes: Paul Gagnon 03-14-2002, 02:49 AM Hard lines? Do you mean brake lines? If that's what you mean you've got to be kidding. That's not a tech question. :rolleyes: Take five minutes out of your busy day and hold your tape measure up to the axle. Then write the lengths you need down on a little piece of paper and go buy some hardline at the parts store. :rolleyes: GFI 03-14-2002, 02:49 AM Nice To Meet You!:D Welby 03-14-2002, 05:28 AM Originally posted by Paul Gagnon Hard lines? Do you mean brake lines? If that's what you mean you've got to be kidding. That's not a tech question. :rolleyes: Take five minutes out of your busy day and hold your tape measure up to the axle. Then write the lengths you need down on a little piece of paper and go buy some hardline at the parts store. :rolleyes: What a concept :D Po' riggity 03-14-2002, 11:55 PM Paul, it is a tech question, if the axle is more than 100 miles away from you, and you can't get down there to measure.. LOL... Anyway.. I think I got it figured out :) Scott | |