Now making stainless twin sticks for Dana 300 , There fixture bent and then Tig welded to fit up thrue the stock floor board hole. There not like the Foreign made erecter set type that stuffs your shifter up under your dashboard .

( well I made all the tooling using a new old stock shifter to get the fit as close to stock as I could there still might be some trimming to do or some tweeking of the shift rods)

There $114 with shipping to the lower 48

Duffy
D.D.Machine
(360)649-4465
Paypal name is dd98370@hotmail.com <<<< NOT a email address

Could I have them "bent wierd-custom" cause my 300 is flipped?

well have 50 sets on te shelf mid week.

Will they work with a T18 trani? They look like they might hit the body of the trani, being larger than a T5.

The new batch has two 45* bends to clear the tranny tops better. but there still made to fit up thrue the stock hole.
I well post pics of the new ones when I get a chance.

Duffy

new batch just done

Now making stainless twin sticks for Dana 300 , There fixture bent and then Tig welded to fit up thrue the stock floor board hole. There not like the Foreign made erecter set type that stuffs your shifter up under your dashboard .

( well I made all the tooling using a new old stock shifter to get the fit as close to stock as I could there still might be some trimming to do or some tweeking of the shift rods)

There $114 with shipping to the lower 48

Duffy
D.D.Machine
(360)779-2500
Paypal name is dd98370@hotmail.com <<<< NOT a email address
Is trimming needed to get it to work or not?

looking for a twin stick set up to work with a flip kit in a yj. Will this work, or will I need a different length and bend shifter? If so, can you make them?

price still good? Got some sort of matching stick for the 203F in front of the 300?

im wondering if this price is still good and will it work with a aw4 infront of it

yes still the same price ,,, I have lots in stock.

got mine in and i like it, gonna order another maybe next week

still making these??????

I have a set of your twin sticks on my dana 300. The one shifter is real loose and I cannot get it to tighten no matter how hard I turn the allen screw in. I fear I may have been overzealous about trying to shift that rail when my transfer case was jammed and forced a flat spot onto the shift rail. Do you have any ideas?
Thank you,

sean

feel free to call me
Duffy
D.D.Machine
(360)649-4465