i just got one i'm gonna bone out. the front axle, tires and rims and rear spring are all spoken for, but the rest is up for grabs.

cruiserbrett has dibs on the title
some of the fllorboard are spoken for as well

i'll post some pics tomorrow. better get back to me fast cause i'm choppin this thing up on sunday!:grinpimp:

did i mention that i don't like 55s?!:flipoff2:

hows the muffler bearings??? blinker fluid??? and the thingy that connects to the watchamacallit that moves the dohickey:flipoff2: if you need some help georg just holler:D

steering box, driver's door regulator, dome light [for Gene],front floormat. Thanks. See you at the Hammers!

2nd in line on floor mats.

does it have the funky ass boxy looking reverse lights? i need a left lens at least, but will gladly take both. also need lower front right door hinge assy if the stay pin is in good shape. how about a column mounted ign switch with key?

emblems???

steering column ?
in 72, is the steering box and column one piece?

future MT box upgrade would work great w/one of those 55 rag-joint cloumns...
thanks

here are some pics:

steering box, driver's door regulator, dome light [for Gene],front floormat. Thanks. See you at the Hammers!


i want these parts to go to happy homes, not to be resold. lemme know what you need and for whom. i doubt gene would want this dome light.....

I could use some wide-cut rear wheelarches and the front side vent if those are the open style. I think I might need the drivers side vent linkage as well and the drivers door handle if its the same style as mine.
EDIT : I may need the upper dash foamy part if it's the same as a '79... anybody knows ?

Early planning for a project that will take me forever to complete, as usual :grinpimp:

It looks like it has potential to be be a nice driver though :(

2nd in line on floor mats.


no floor mats, but the rubber mat is in good shape if somebody wants it.

does it have the funky ass boxy looking reverse lights? i need a left lens at least, but will gladly take both. also need lower front right door hinge assy if the stay pin is in good shape. how about a column mounted ign switch with key?


it's got 2 small independant reverse lights. they're intact and i can pull em off for you.
i think i'm gonna try to sell the doors as a set, but i'll keep you in mind on the hinge.
the ignition switch is in the dash, but i do have the key for it.

emblems???


the front fender emblems are spoken for, but the tail gate stuff is available....

steering column ?
in 72, is the steering box and column one piece?

future MT box upgrade would work great w/one of those 55 rag-joint cloumns...
thanks


column is yours bro. you owe me a case of sierra nevada pale ale! you can keep your dam ice cream!:flipoff2:

It looks like it has potential to be be a nice driver though :(


not exactly.....

does it have the funky ass boxy looking reverse lights? i need a left lens at least, but will gladly take both. also need lower front right door hinge assy if the stay pin is in good shape. how about a column mounted ign switch with key?


back up lights:

I could use some wide-cut rear wheelarches and the front side vent if those are the open style. I think I might need the drivers side vent linkage as well and the drivers door handle if its the same style as mine.
EDIT : I may need the upper dash foamy part if it's the same as a '79... anybody knows ?

Early planning for a project that will take me forever to complete, as usual :grinpimp:


here are some pics for ya. the wheel arches are in decent shape, the front vents are there, not sure about the vent linkage but i'll check, door handles go with the doors, the dash pad is cracked some, not sure if they interchange between certain years.

steering box, driver's door regulator, dome light [for Gene],front floormat. Thanks. See you at the Hammers!


want this for our "FOTR program"?!

not exactly.....

Come on don't be a pussy it's just steel :flipoff2:

here are some pics for ya. the wheel arches are in decent shape, the front vents are there, not sure about the vent linkage but i'll check, door handles go with the doors, the dash pad is cracked some, not sure if they interchange between certain years.

Thanks ! That dash pad is not much better than mine, and I understand the complete doors thing ;)
I'll PM you about the wheelarches cut ;)

bye,

it's got 2 small independant reverse lights. they're intact and i can pull em off for you.
i think i'm gonna try to sell the doors as a set, but i'll keep you in mind on the hinge.
the ignition switch is in the dash, but i do have the key for it.
wrong style on the backup lights...damn. although, could you possible get me measurements....maybe they will swap in? any pigheads know if they'll swap in place of the late 72-73 lights?

i've got two dash ignition switches with keys also...i'm just trying to get out of drilling a hole :D

i understand on the doors.

Georg- could you take a pic of the dash? I need a wiper/washer unit...

column is yours bro. you owe me a case of sierra nevada pale ale! you can keep your dam ice cream!:flipoff2:

I owe you more then that :D
what happened to Fosters :beer: ?

thanks again,
manny

I would be interested in the pad that goes around the speedo and gauges...

The sm465 clutch disk and PP I picked up from you a while back are loving life in my 55 :)

bk

hows the muffler bearings??? blinker fluid??? and the thingy that connects to the watchamacallit that moves the dohickey:flipoff2: if you need some help georg just holler:D


we all know that you're a couple of quarts low on blinker fluid!:flipoff2:

Georg- could you take a pic of the dash? I need a wiper/washer unit...


is this what you're after?

I would be interested in the pad that goes around the speedo and gauges...

The sm465 clutch disk and PP I picked up from you a while back are loving life in my 55 :)

bk


hey bk.
would this work for you?

not much left. i got busy with the air tools and sawsall for a couple of hours.

the parts that are good and still for sale are:
windshield, rear side glass
gas tank
3 spd trans with top shift conversion, plus one more of these
good 3 spd t-case with mechanical shift linkage, plus one more of these
a cruiser 4 spd, condition unknown but who cares, it's free!
rear heater and hoses, firewall brass fittings. all in very good condition
rear seat with a couple of teares/holes at the upper corners, besides that it's in pretty good shape
full set of doors
frame
rear axle
drive shafts
good radiator
front fenders (usual rust at bottom, have seen em way worse
wiring harness, or at least parts of it
the rest of the electrical gismos
..........

georg,
can I get dibs the trim plate around the heater controls, and the chrome button to the right of the squigly line vent pull knob?

Hows the tailgate?

oh yeah, the dash pad is for early years only. If you got it out in one piece I would be interested in it.

i'll rip the dash apart tomorrow. carefully, i promise.


tailgate went to steve, who bought my other 55. he broke the glass in it so i gave him the complete tailgate to tear apart. along with an alternator, sm465 with bell housing, .........:grinpimp:

I could have used those springs!! You still want that table? PM or call me.

Dan

I could have used those springs!! You still want that table? PM or call me.

Dan


hey dan.
the springs were spoken for before i even got the 55 or knew about it. i called your cell and pager yesterday; i do want the table. call you tomorrow.

"good 3 spd t-case with mechanical shift linkage, "

What do you want for this? I mostly want the linkage (including the nose cone peice), but will take the whole thing.....
PMK

is this what you're after?

Thanks Georg- not gonna do it though.

"good 3 spd t-case with mechanical shift linkage, "

What do you want for this? I mostly want the linkage (including the nose cone peice), but will take the whole thing.....
PMK


i'll drop it off at your place later today.:cool2:

current state, but i'm gonna pick up my plasma cutter at lunch and then we're choppin her up!!!!!

thats pretty much what jason (weaklink) is going to do to his then build one big family cage for it. (after bobbing the rear) wish i was closer and had more time, id love to help out.. maybe next summer


chris:cool2:

Georg,
Hows the speedo cable?
I may want to give it a try, since mine only works intermittently :(
thanks,
manny

Georg,
Hows the speedo cable?
I may want to give it a try, since mine only works intermittently :(
thanks,
manny


i'll pull it later today and take a peek at it.:)

Georg,
Hows the speedo cable?
I may want to give it a try, since mine only works intermittently :(
thanks,
manny


it's in good shape. i'll stash it for you bro.:cool2:

"good 3 spd t-case with mechanical shift linkage, "

What do you want for this? I mostly want the linkage (including the nose cone peice), but will take the whole thing.....
PMK


sorry pat, not gonna be able to make it today but i'll drop it off on my way to work tomorrow. you gonna be there to help me unload this? call me if you get a chance.:)

want this for our "FOTR program"?!

That'll work Georg. As far as the other stuff, the floor mat/rubber mat would be for me, the other stuff would be spec, so if you find a better home, you know what to do.

Don't forget to bring down that CD you were gonna burn for me to JV this weekend. :cool2:

so is the floor mat unobtanium?!

does it have the funky ass boxy looking reverse lights? i need a left lens at least, but will gladly take both. also need lower front right door hinge assy if the stay pin is in good shape. how about a column mounted ign switch with key?


sorry i did'nt get back to you earlier ige. the backup lights are'nt in that great a shape and from what i gather, the bolt pattern is different.

No problem, I'm at work untill 4, home at 5PM. You could back up onto the lawn alongside the driveway and just roll it out for a soft landing. I can move it when I get home. Do me a favor and warn Kim though, no telling what she might do seeing a long-hair driving across the lawn.:rolleyes:
PMK

sorry pat, not gonna be able to make it today but i'll drop it off on my way to work tomorrow. you gonna be there to help me unload this? call me if you get a chance.:)

update: Kim called.... "there's a motor in our lawn!!! do you know anything about it"
Me: "No sweetheart - I'll take care of it when I get home"

so is the floor mat unobtanium?!

Don't know, cause I don't deal a lot in fj55 parts, but if I had to guess, I would say prolly so.

The straight scoop here is that the floormat in my 45 doesn't have ANY shifter holes in it, and when I do the 4 speed tranny swap this winter, I would prefer not to cut into my mat, but rather to work with one from a FJ55 that already has the holes in it. Same reason I picked up that other tranny tunnel for the project.

Not sure it will work but, for the price, I figured I would take a shot at it. I think I can make it work. Fair enough?

george you coming down this weekend? you riding with me? call me when you get a chance..

hijack over....


chris:cool2:

so is the floor mat unobtanium?!
i see em pop up all the time...bruce miller had three of them in a piggie he will be sending to the scrap yard.

Are the rear wheel arches and parts of the surrounding rear quater still available.

thanks

No problem, I'm at work untill 4, home at 5PM. You could back up onto the lawn alongside the driveway and just roll it out for a soft landing. I can move it when I get home. Do me a favor and warn Kim though, no telling what she might do seeing a long-hair driving across the lawn.:rolleyes:
PMK



update: Kim called.... "there's a motor in our lawn!!! do you know anything about it"
Me: "No sweetheart - I'll take care of it when I get home"


no sweetheart, that's our new lawn ornament!:grinpimp:
that fawker was tough to get out of the back of the camry by myself.

Don't know, cause I don't deal a lot in fj55 parts, but if I had to guess, I would say prolly so.

The straight scoop here is that the floormat in my 45 doesn't have ANY shifter holes in it, and when I do the 4 speed tranny swap this winter, I would prefer not to cut into my mat, but rather to work with one from a FJ55 that already has the holes in it. Same reason I picked up that other tranny tunnel for the project.

Not sure it will work but, for the price, I figured I would take a shot at it. I think I can make it work. Fair enough?


all yours, we'll figure something out.

george you coming down this weekend? you riding with me? call me when you get a chance..

hijack over....


chris:cool2:


no can do, a lot of other stuff came up. no more hammers for me this year.:(

but thanks for the offer chris.

Are the rear wheel arches and parts of the surrounding rear quater still available.

thanks


sorry, but they'll be on their merry way to france shortly.

does that have the offset rear axel? Im interested if it does
chuck

does that have the offset rear axel? Im interested if it does
chuck


come and get it! $150

any short woman with a flat head that owns a liqure store hidden in there Georg ??

any short woman with a flat head that owns a liqure store hidden in there Georg ??


i wish. believe me, i looked!

Rearview mirror??? :D

Rearview mirror??? :D


got one on the passenger side. it's got a dent near the swivel/hinge but it works well and isn't sloppy. the glass is intact. $20 shipped.

HOW ABOUT HEADLIGHT BEZELS? SHELDON@TDMACH.COM OR PM ME

HOW ABOUT HEADLIGHT BEZELS? SHELDON@TDMACH.COM OR PM ME


those were some of the first parts to go. but, i do have the headlights and bucketts if you need em. $10 plus shipping.

Georg,

Not trying to hijack so, two exterior rear views available $5 more than Horhay wants for his.

Georg,

Not trying to hijack so, two exterior rear views available $5 more than Horhay wants for his.


put em on ebay!

put em on ebay!

That'd be a PITA

I could use some wide-cut rear wheelarches and the front side vent if those are the open style. I think I might need the drivers side vent linkage as well and the drivers door handle if its the same style as mine.
EDIT : I may need the upper dash foamy part if it's the same as a '79... anybody knows ?

Early planning for a project that will take me forever to complete, as usual :grinpimp:


will this work for you dennis?

dropped you a PM on the speedo cluster pad...I'm still interested if it's available...If the deal above falls through for the short lady with a flat head and liquor store, I got dibbs :flipoff2:

bk

will this work for you dennis?

perfect, good job :D

thanks ! :beer: