How hard is this to use? I can conceptualize in my mind what I want to build, but I am not that good with designing on a computer. I generally have a hard time putting what is on my mind on paper also.

I cannot even stand to use google sketch-up for more than 5 minutes as I find it so complicated. Am I going to feel the same way with this software?

Thanks, Tim

How hard is this to use? I can conceptualize in my mind what I want to build, but I am not that good with designing on a computer. I generally have a hard time putting what is on my mind on paper also.

I cannot even stand to use google sketch-up for more than 5 minutes as I find it so complicated. Am I going to feel the same way with this software?

Thanks, Tim

I tried my best to show you in these 2 videos:
Here is the link:
Part 1 of 2
YouTube - 1 of 2 bend-tech assembly demonstration (http://www.youtube.com/watch?v=pREZreSAV8I)

Part 2 of 2
YouTube - 2 of 2 bend-tech assembly demonstration (http://www.youtube.com/watch?v=GAmLIrhleQQ)


When it comes to tube design, bend-tech is 2nd to none in ease-of-use and productivity.

.

Yeah I watched the video's but I couldn't figure out what they were doing without audio. I just don't want to waste $300 and not be able to run the thing. I have always been a fly by the seat of my pants guy, but I wanna do this right this time and design first. Plus steel is getting expensive!

on edit: I guess there is audio...I don't know what was up the first time!

I wish he would tell how he was doing things rather than just basically what he was doing.

Pencil and napkin are my cup of tea!

Tim

on edit: I guess there is audio...I don't know what was up the first time!



In some computers, you need to turn your volume up a little.


I wish he would tell how he was doing things rather than just basically what he was doing.



If this is what you want, check out the assembly tutorial;
http://www.2020softwaresolutions.com/forums/showthread.php?t=58

and check up all of our help write ups;
http://www.2020softwaresolutions.com/forums/forumdisplay.php?f=9

.

Ok, I am gonna take a shot at it. If I fail it won't be from lack of effort on your part!!

Thanks, Tim

Does this work on a Mac?

Ok, I am gonna take a shot at it. If I fail it won't be from lack of effort on your part!!

Thanks, Tim

Does this work on a Mac?

Here is a link on how some guys run bend-tech on the mac:
http://www.offroadfabnet.com/forums/showthread.php?t=2778&highlight=windows

.

I just purchased the Bend Teck Pro and I will have to say this product is great. It took me less then 15 minutes to design a multi bend rear frame for my TJ with only simple measurements. Thanks for such a great product.

Pro shipped to 98338

pro shipped to 98338

$275.00

I just purchased the Bend Teck Pro and I will have to say this product is great. It took me less then 15 minutes to design a multi bend rear frame for my TJ with only simple measurements. Thanks for such a great product.

Thanks for posting up. Guys are amazed how easy and fun the software is after they start using it.

Have a great day!!!

Could i get a quote to 76031 please.

Could i get a quote to 76031 please.

bend-tech pro is $275.00

pm a price on the pro to 43947, also what programs are needed to run it?

pm a price on the pro to 43947, also what programs are needed to run it?

$275.00 XP or Vista work great.

Need to order this!!!

Need to order this!!!

Sounds good!

All orders have shipped / or are shipping today.

Thank you!!!

ttt

Hey just left you a message call me back so I can order this sucka.

send price for ez to 73003
thanks

Is Pro $275 plus shipping like on the web site? Or do Pirate members get anything special?

send price for ez to 73003
thanks

$69.00 + $10.00 shipping.

Is Pro $275 plus shipping like on the web site? Or do Pirate members get anything special?

$275.00 plus $10.00 shipping is the price for everyone.


Thank you for the opportunity,
Cris.

Bought this last night, and downloaded it. Sent a few questions to the support email.

Seems like a great product. Can't wait to get some time with it under my belt.

Bought this last night, and downloaded it. Sent a few questions to the support email.

Seems like a great product. Can't wait to get some time with it under my belt.

I escaped out of town for a couple of days. Just got back in. Your key file sent and answers to your questions. Thank you for letting me get a couple of days with the family.

Cris

No problem. Thanks for the quick response, and great product. I am actually amazed at how easy it is to use, once you actually read the tutorials...hah...

bump

Need price for pro, se and pricing module option, download version

Need price for pro, se and pricing module option, download version

PRO: $275.00
SE w/Pricing module: $499.00

All products are down-loadable at the time of order and a cd/manual is send in the mail shortly there after.

Hey i purchased the bendtech program from you a little over 2 years ago. Long story short i installed into my tower and the tower crashed a day later. In no way or form am i blaming your program but is their a way to get a discount on my next bendtech purchase?

I still have the old tower with hopes of retrieving the program but after paying $100 to have a computer shop try to copy he said he could not copy the program.

Thanks for any help. Chad romine

Hey i purchased the bendtech program from you a little over 2 years ago. Long story short i installed into my tower and the tower crashed a day later. In no way or form am i blaming your program but is their a way to get a discount on my next bendtech purchase?

I still have the old tower with hopes of retrieving the program but after paying $100 to have a computer shop try to copy he said he could not copy the program.

Thanks for any help. Chad romine

Please send an email to support@bend-tech.com and tell me:
Your Name
Which Bend-Tech Program you had
The serial number from the cd case [if you still have it].
Refer to this thread so I can put everything together when I receive the email.

Thank you,
Cris

Just placed my order, cant wait to start designing with it.

Thanks!!

All orders have been shipped.

Thanks guys!!!!

It looks like guys are starting up for the winter builds. Bend-Tech PRO is a great tool to help get those projects under way and completed by spring.

.

I have Bend Tech Pro and it kicks ass! It is so much easier to figure how much material you will need with almost no waste.

do you get the download and a cd when you buy it?

do you get the download and a cd when you buy it?

yes


.

How often is the program updated and is there a charge for updates?
Thanks

How often is the program updated and is there a charge for updates?
Thanks

About once every 18 months. There is a charge for the upgrades. Customers who purchase 4 months and closer to the upgrade release, receive it at no charge.

Thank you for all of the orders over the weekend. They will be shipping today.

.

http://www.bend-tech.com/web_images/wpe2B.gif

ttttt [time to top the toppers]

.

I will call you in the morning to get ordered up like we discussed in PM a few days ago - weve been swamped and having fun playing with our new bender!

Thanks so much!

I want a BT-Pro price please.

I want a BT-Pro price please.

$275.00 + $10.00 shipping/handling.

Thank you for the opportunity,
Cris 1.651.257.8715

.

Just finished with the down load. Now lets see how much damage I can do. Thanks

Just finished with the down load. Now lets see how much damage I can do. Thanks

Thanks!!!

I just sent you a new download that has a couple of options you will like.

Thanks again. Email me at support@bend-tech.com with any question you may have. Make sure you check out the "Assembly Tutorial" under your "Help" menu.

Later,
Cris

The simulation function is used to give you a simple animation showing your part moving through a bender. It is available in the Custom Part, Custom 3D Part, XYZ, LRA, and Sketch interfaces. Like any animation, it is a series of pictures (or slides) shown in sequence.

This is a view of the Simulation tab with its default settings:
http://www.2020softwaresolutions.com/images/simulation01.gif

Here is a brief description of what each setting does:
"dir" - sets the direction in which the part will be bent in the simulation.
"style" - sets whether or not the die will rotate as the part is being bent.
"distance per slide" - sets how much of the straight portions of the part moves through the simulation per slide.
"rotation per slide" - sets how much a part rotates per slide (providing there are rotations in your part).
"bend per slide" - sets how much of the bends are shown per slide.
"scale" - sets the size of the animation. The lower the number the larger the animation will appear (1 being the lowest).

The "Run Simulation" button will bring up the simulation viewer as shown below.
http://www.2020softwaresolutions.com/images/simulation02.gif

http://www.bend-tech.com/web_images/btez-animated-1.gif

I just got back into town after the PRI trade show. All orders will be shipping on Thursday. Sorry for the delay, however, should be at your doors by Christmas.

Cris.

Let me tell you that Bend Tech customer service is top notch. I had to redo my lap top and he helped me out way more then needed. :p

pm sent what is the download size of pro? thanks

pm sent thanks

Thanks for the order. You should be all set. I will be in and out over the holidays. Please feel free to drop an email if needed.

Thanks again. EVERY order is very much appreciated.

.

what is the difference between the PRO and the SE with the pricing module? I want to order one, just not sure which one yet?

What file formats can the import/export module transfer in - can in export 3d geometry? Also - does your Bend-Tech 'Super' SE package include both import/export functionality or just import? I work with Autodesk Inventor so it'd be nice to be able to bring in designs to further develop on.

what is the difference between the PRO and the SE with the pricing module? I want to order one, just not sure which one yet?

Here is a comparison chart:
http://www.bend-tech.com/comparison_chart.htm

Keep in mind that you can purchase PRO and in the future if you decide you want to upgrade, you pay the price difference.

What file formats can the import/export module transfer in - can in export 3d geometry? Also - does your Bend-Tech 'Super' SE package include both import/export functionality or just import? I work with Autodesk Inventor so it'd be nice to be able to bring in designs to further develop on.

Import module is both Import and Export.

Import; 3d dxf wire geometry, 3d dwg wire geometry, stp or STEP solid part models of single piece parts.

Export; 3d dxf wire geometry. The 3d dxf wire becomes your 3d sketch line to work from with Inventor.

I dont know if its been asked before but does this do suspension geometry for designing 4 link triangalated systems? if so please PM me price. if it doesnt I still need a price and the name of another software if you know of any

Thanks

I dont know if its been asked before but does this do suspension geometry for designing 4 link triangalated systems? if so please PM me price. if it doesnt I still need a price and the name of another software if you know of any

Thanks

pm sent

I'll be here all week shipping orders and offering support.

Thanks for a great year!!!

.

can i have a quote for ez-3d, thanks

can i have a quote for ez-3d, thanks


The price for Bend-Tech EZ3D is 149.00 + 10.00 for shipping.

Thank you for the opportunity,
Cris 1.651.257.8715

Just ordered BT Pro. I can't wait to try it out.

-Jon

Just ordered BT Pro. I can't wait to try it out.

-Jon

Thank you very much. Make sure you start with the "Assembly Tutorial" under the bend-tech "Help" menu.

Have a great evening.

how about a price on ez3d

how about a price on ez3d

$149.00 + $10.00 shipping.

Thank you for the opportunity,
Cris

.

Bend-Tech was on Truck-U this weekend.

.

Can I get a price on Pro and SE? Also do you/can you ship to APO addresses?

Thanks
Charlie

Can I get a price on Pro and SE? Also do you/can you ship to APO addresses?

Thanks
Charlie

PRO: $275.00 + $10.00 shipping
SE: $399.00 + $10.00 shipping

Yes, we ship to APO addresses almost every week.


Thank you for the opportunity,
Cris
1.651.257.8715

interested in bend tech pro, how do i go about ordering it?

interested in bend tech pro, how do i go about ordering it?

The easiest way is through this link:
https://www.2020softwaresolutions.com/shop/home.php?cat=249

.

I searched and no one seems to have asked. How is it running on Windows 7?

I searched and no one seems to have asked. How is it running on Windows 7?

Runs great!!!!

Runs great!!!!

Great. Now I just gotta save money for the software. Just got the laptop.

ttt

i didn't notice if it said anything on the website about one person running bend tech pro on two machines. i have one junky computer that can travel to the garage and one good computer that doesn't leave my desk. can i install and use bend tech on both computers? i will never be running it in two places at once and no one has access to either computer besides me (password protected). my desk and truck aren't at the same address. it would make designing my cage way easier if i could put all the basic stuff into the software in the garage and perfect the design at home. so can i do that? with one license?

ok i found it. it sounds like i can. any way i can screw it up that i need to worry about?

ttt

this may be a dumb question, but do you ever have sales on your products?

just curious, im looking to purchase the basic version soon, or possibly the next one up, but wasnt sure.

Also, how many computers can i load this on? i would like to have it on my shop computer and my home computer both for when im in the shop working, or at home planning projects. I would also like to put it on my travel laptop, so i can quote jobs when im away... is that possible?



thanks

Sent pm,
Piros 1

this may be a dumb question, but do you ever have sales on your products?.......

No. We for the most part never offer a discounted price. The price is very fair and has worked very well to make sure everyone can get the same low great price.


......
Also, how many computers can i load this on? i would like to have it on my shop computer and my home computer both for when im in the shop working, or at home planning projects. I would also like to put it on my travel laptop, so i can quote jobs when im away... is that possible?.....

You are able to use the software on both computers as long as you are the only user as you stated. Here is a hyperlink that explains it in detail:
http://www.2020softwaresolutions.com/forums/showthread.php?t=212


Thank you for the opportunity,
Cris

ttt

Well, just leaving on a jet plane on vacation with the wife and kids. I do know when I will be back again........ that will be the 15th.

This means I will not be on the sites to help anyone out. I will NOT be bringing a computer with me. I will NOT be bringing a phone with me. FIRST TIME IN 8 YEARS, I am leaving my business completely behind for 1 week.

If you call in (1.651.257.8715 [Monday-Friday, 8:30am to 5:00pm central]) or send in emails (support@bend-tech.com), other engineering specialists will be here and will be able to give you a hand.

Orders will continue to be processed and shipped, so don't be afraid to call them in or order on-line.

See ya,
Cris

Does the SW version work with solidworks 2010?

Does the SW version work with solidworks 2010?

Yes it does.

It also works with the 64 bit version.

Yes it does.

It also works with the 64 bit version.

Sweet, I will be buying Solidworks 2010 on the 31st(15% off. last day of the quarter.) Then I will be buying Bend-tech SW shortly after.

is pro 275 shipped, and do you offer military discounts?

Thank you for all the orders. It looks like April will be an all time record month for sales.:bounce2:

Just ordered. Can't wait!

Just ordered. Can't wait!

Got it and about 8 more to make the month the best ever!!!!!

About 220 Bend-Tech systems sold this month.

Thanks to everyone!!!

.

Does pro work with 64bit Windows XP?

Does pro work with 64bit Windows XP?

Yes it does. It also runs on Vista and Windows 7, 32 or 64 bit.

Thank you for the opportunity,
Cris

.

price please. shipped to 95662

All of our prices (including shipping) are at:
https://www.2020softwaresolutions.com/shop/

Thank you for the opportunity,
Cris

checkin it out now. thanks!

ttt

Is there a trial version?

Is there a trial version?

Sorry, there is not.

ttt

price shipped to 97355

price shipped to 97355

Bend-Tech PRO....$275.00 + $10.00 shipping

.

ttt

just bought my copy of bend tech pro.

I just downloaded Bend-Tech Pro. Now I just need to figure out the best way to run it on my Mac.

:smokin:

Thanks for the orders:)

ttt

Bump-
Currently using to design my exocage on my Dodge crawler. I have Mech Eng degree and have used a ton of software packages. This is a little cumbersome from a spacial design standpoint, but very good for what it does. I would not have attempted my bends without it.

TD

....... very good for what it does. I would not have attempted my bends without it.

TD


Drop me an email at support@bend-tech.com if you need anything.

Thanks,
Cris

Price for EZ-3D download

Also is it possible to install on my home PC and laptop with 1 licence?

Price for EZ-3D download

Also is it possible to install on my home PC and laptop with 1 licence?

$149.00 + $10.00 shipping.

Run Bend-Tech on 2 of your computers. The answer is YES. Here is a hyperlink of the detail:
http://www.2020softwaresolutions.com/forums/showthread.php?t=212

We ALWAYS have everything in our store in stock and ready for shipment!!!

Can this software run on a mac?

Can this software run on a mac?

It doesn't run native to the Mac, however, many guys are running windows emulators and it works great on the Mac with that.
Here is a couple of discussions:
http://www.offroadfabnet.com/forums/showthread.php?t=6452&highlight=windows
http://www.offroadfabnet.com/forums/showthread.php?t=2778&highlight=windows

Ordered!!!

Edit: received, great customer service!!!! Very easy software to use. Thanks again!!!!

Is the pro version set up for the JD2 model 32?

Is the pro version set up for the JD2 model 32?

Yes. You will need to calibrate your tooling to the software. Takes just a few minutes and we are happy to assist.

Have a great week!!!

how much to upgrade my ez to 3d or se? thanks

how much to upgrade my ez to 3d or se? thanks

Take $59.00 off of any of the systems.

SE: $499.00 - $59.00
EZ3D: $149.00 - $59.00

Most upgrade into PRO. $275.00 - $59.00 = $216.00

EZ-3D is single parts only (no assembly).
SE is designed for commercial accounts
PRO is our Assembly entry product and is designed, in part, for the 4x4 community.

To make sure that we get you into the correct product, please feel free to call me at 1.651.257.8715

Cris

1st email news letter is now being released. It will take a few days to get to everyone via email. We are sending them out in bunches and keeping an eye on any problems that may arise.

Here is a link to our 1st newsletter:
http://www.bend-tech.com/newsletter/001/

Thank you for all of the orders. We have been swamped.:)

http://www.bend-tech.com/newsletter/002/koh.gif

We will be at KOH in the vendor booth. I would give you a booth number if they had any. If you are planning to be out there next week, stop in and say hi. It will be myself and my wife Annie enjoying the events of KOH.

For those of you that don't know what KOH is, here is a link:
http://ultra4racing.com/events/griffin-koh/


Brandon and Dave will be back at the office helping you with any questions.

.

Just putting my order through and I thought I'd see if I was missing any Pirate discount code? :) :)

Just putting my order through and I thought I'd see if I was missing any Pirate discount code? :) :)

No Pirate specific deals. Right now we do have the SM module option with the PRO for an additional $150.00.
SM is a sheet metal software that goes for $275.00.

Thank you for the opportunity,
Cris

Thanks for your help Cris,

Joey Weber

Great to see many of you guys at KOH. I think I did about 100 demonstrations. Still coughing the dust out of my lungs from within the big tent.

For a limited time, Bend-Tech SM (sheet metal) is available for $150.00 with purchase of Bend-Tech PRO.

Ordered and downloaded sunday. Had some tube fenders for the Cj figured out in no time. Great software for sure. Any chance of being able to have rectangle tubing or did i miss it.

Ordered and downloaded sunday. Had some tube fenders for the Cj figured out in no time. Great software for sure. Any chance of being able to have rectangle tubing or did i miss it.

Sorry no rectangular tube option. Customers are either stacking square tube or using Sheet Metal module for representation.

Thanks for the quick reply. Hope to get the sheet metal program soon,but funds are tight and bills coming due.

hey all i just bought bt pro last month i was wondering if anyone with this software from central PA would be interested in showing me the more advance features of this?

Thanks for all of the orders!!

.

Just ordered, thanks.....:grinpimp:

Thank you!!!

Just ordered the Pro 4-5 upgrade with the sheet metal module and can't wait to get it.

Just revewived my BT Pro and am starting to play with it. It's great:grinpimp:

Thank you!!!

Very good communication, thanks so much.

Thank you for the orders. Yesterday we were snowed in. Roads were not plowed out until 3:00pm. Both yesterday's and today's orders are being sent out this afternoon.

Thanks again,
Cris

Bend-Tech PRO with the sheet metal module continues to be a big hit.

Just Ordered, Looking forward to playing with it

SPECIAL: PRO and SM together for only $435.00

Bend-Tech PRO release 5x and our new SM (Sheet Metal) module together for a reduced price. Design your tubing and your plate work together. Bend your tubes and send out dxf files of your plate work for a plasma table or print out 1:1 scaled drawings for easy tracing.

.

If you are little iffy on the need for software, you can start with EZ for only $69.00 or EZ-3D for only $149.00. If you decide you want to get into assemblies at a later date, we will refund you all but $10.00 for ez upgrade and the entire $149.00 for an ez3d upgrade to PRO.

We finally are done with our new Bend-Tech packaging.
http://www.bend-tech.com/images/IMG_2877.jpg
http://www.bend-tech.com/images/IMG_2882.jpg

is there sales tax added for Mn residents?

is there sales tax added for Mn residents?

I like to take care of the guys in my backyard and pick up the sales tax for you.

thats awesome, i think ill be ordering pretty soon, thanks

Give us a call and will swing a deal.

For a short period of time we are offering free shipping. You receive a download at time of order and a couple days later you will have your cd and manuals in the mail.

For a short period of time we are offering free shipping. You receive a download at time of order and a couple days later you will have your cd and manuals in the mail.

Good deal.

Does it support rolled tubing?

Good deal.

Does it support rolled tubing?

You can draw the larger radius of roll benders and Bend-Tech will tell you the stretch and where the bend starts and ends. Bend-Tech SE has some additional functionality for roll benders.

.

All orders ship same day and are available with a download.

.

Would like a price thanks

I have BT PRO 4.0.3 and would like to get the BT SM

is there a newer version PRO out now
if so do i need to buy both
what prices am i looking at

Would like a price thanks

PM sent

Price on BT Pro please.

Price on BT Pro please.

PM sent.

$275.00 is the price for Bend-Tech PRO

.

I have SE 4.xx with pricing, import, railing module need price 5.xx upgrade. Is their an upgrade for HD 4xx?

Thanks John

I have SE 4.xx with pricing, import, railing module need price 5.xx upgrade. Is their an upgrade for HD 4xx?

Thanks John

PM sent

Time to give this thread a bump.

just upgraded from 3D to Pro....Wow... I wish I had done it years ago. I'm not sure if there was a change or I was just doing it wrong, but the plug in calibration calculator has dialed in my die to where I can cut a straight piece of tubing with accuracy to an 1/8", bend it and it's perfect. The simplicy of the pickpoints allowed me to design an entire roll cage within 2 hours of loading the program and I finally have a solid grasp of the tristar and Apex measurements. I actually think it's easier to create an assembly than to create a 3D part.

I just came in from my shop about an hour ago after bending up a project for work........ to put is simply... Bend-Tech Pro Kicks Ass....... to anyone not sure if it's worth the small fee, I'd pay twice what they sell it for. (glad I didn't have to though)

Thanks Guys :D

Bump for the Bend-Tech thread.

price for Pro shipped to 30319.

thanks.

just upgraded from 3D to Pro....Wow... I wish I had done it years ago. I'm not sure if there was a change or I was just doing it wrong, but the plug in calibration calculator has dialed in my die to where I can cut a straight piece of tubing with accuracy to an 1/8", bend it and it's perfect. The simplicy of the pickpoints allowed me to design an entire roll cage within 2 hours of loading the program and I finally have a solid grasp of the tristar and Apex measurements. I actually think it's easier to create an assembly than to create a 3D part.
I just came in from my shop about an hour ago after bending up a project for work........ to put is simply... Bend-Tech Pro Kicks Ass....... to anyone not sure if it's worth the small fee, I'd pay twice what they sell it for. (glad I didn't have to though)

Thanks Guys :D

I usually use the assembly mode for a single tube because I think it IS easier! Maybe it's because I've used it more, but the part mode just kicks my ass. :D

Now I'm getting my ass kicked figuring out SM, I'm slow on computers so I'm sure it's no fault of the program and simply my dumb ass punching the keys. :D I just gotta make time in the morning to call Cris and he'll walk me through it again, just like he did with BTPro.
Looking forward to dialing in on SM and taking my fab work to a new level again!

just upgraded from 3D to Pro....Wow... I wish I had done it years ago. I'm not sure if there was a change or I was just doing it wrong, but the plug in calibration calculator has dialed in my die to where I can cut a straight piece of tubing with accuracy to an 1/8", bend it and it's perfect. The simplicity of the pickpoints allowed me to design an entire roll cage within 2 hours of loading the program and I finally have a solid grasp of the tristar and Apex measurements. I actually think it's easier to create an assembly than to create a 3D part.

I just came in from my shop about an hour ago after bending up a project for work........ to put is simply... Bend-Tech Pro Kicks Ass....... to anyone not sure if it's worth the small fee, I'd pay twice what they sell it for. (glad I didn't have to though)

Thanks Guys :D


Thank you. Customers always say it best.

Later,
Cris

got mine and have been playing with it for a few days! There will be a build thread soon of my new chassis.

Thanks a ton for your help, Cris.

Bend tech pro and sm to 79119

Bend tech pro and sm to 79119

PM sent.

Thank you for the opportunity!!!

Bump for Bend-Tech

looking to order right after christmas!

Is this the source (http://mobile.pirate4x4.com/forum/showthread.php?p=13756661#post13756661)?

pro to 55330 please
Thanks!

Is this the source (http://mobile.pirate4x4.com/forum/showthread.php?p=13756661#post13756661)?

Yes, we are the developers of the Bend-Tech products.

looking to order right after christmas!

We will be here. Accept for Monday the 26th, we are shut down for Christmas.

pro to 55330 please
Thanks!

PM sent.

Thank you for the opportunity.

Price on PRO and SM with shipping to 95240.

Alright, now I just need to figure this thing out! Any active forums?

$275 out the door?, i guess shipping couldnt be much...

Alright, now I just need to figure this thing out! Any active forums?

Start with the "Assembly Tutorial" under the Bend-Tech Help menu.

$275 out the door?, i guess shipping couldnt be much...

PM sent

i have the 65 dollar program, can i upgrade to 3d to create more complicated parts? and howmuch to do so???

i have the 65 dollar program, can i upgrade to 3d to create more complicated parts? and howmuch to do so???

PM Sent.

Quick review after I've been using this software for around five weeks.

I bought Bend Tech Pro 5 and the Sheet Metal module around Thanksgiving and I've been using it to exclusively draw my parts for my CNC plasma table since I got it. Coming from Corel Draw X5 and dabbling with AutoCad, it was a bit of a change in routine. However once you get to know the software it really has a lot of nice features that's geared directly towards quickly making parts. I can come into my office knowing I can be cutting within 15 minutes from the time I sit down. It doesn't matter if you come in with a sketch or you're just winging it to make a part, the software works well either way. When you need to make an adjustment the absolute and incremental system works really nice. On top of that I've been using it for bending square tubing and it's working out great for that too. You are getting a LOT of value for the money with this software, no question! I love the SM module and it's what I use the most.

I only have one real gripe (when can everything be 100% perfect, right?) about the SM module and that's the fact it doesn't export layers in a .dxf. To me this was a big oversight because if you're using a sheet metal software to design custom parts, then the end goal is to most likely cut them. For me I usually have multiple layers such as "inside" for inside contours, "outside" for outside contours, "special" for complex cuts where I may want to adjust the IPM of the cut sequence and "scribe" for a plate marker where I want to scribe the metal instead of actually cutting it. Sometimes I may have different variations of the same part so not using a layer can result in a different part with the same dimensions after it's cut. To put this in perspective, let's say I want to create a part with a base flange and two bends. I draw it out but then I may want to add scribe lines to define where the bend starts so that you can line that up on a sheet metal brake instead of having to validate measurements after the cutting is done. I now have to find all of those contours and create layers so specific tools/toolpaths can be defined for each part of the drawing. Since you need to pass the drawing through a CAM software to define your tool paths, using different layers in the .dxf can make it much simpler. Bend Tech SM has layers in it, but they are not exported so you can't make use of them. It simply exports everything as "Layer 1". This adds steps (and potential errors) to a process that could be fine tuned if the software supported this basic functionality. If the part is not complex it's not a really big deal, however if the part is complex it can add a significant amount of time to create layers for a specific job. If you are bending tubing this has no impact what-so-ever, but if you're using the SM module with the goal of cutting parts via CNC then it can. I am just mentioning this because I made the false assumption that since it showed layers in the software they would be exported and that was a bad assumption on my part. A fine tuning of the layer system to keep it more accessible plus exporting layers would make me VERY VERY VERY happy. The only other trouble I've had is a hand full of "overflow" errors which result in BTP crashing. In five weeks I've had around five crashes so it's not excessive.

This was a great investment for me and I plan on using nothing else for my plasma cutting needs for the time being!

Great to hear it is working great for you.

Time for me to clear out my PM box. I am having a hard time keeping up with the questions on ordering.

2011 was another great year thanks to the Bend-Tech customers.
Looking forward to serving you in 2012 and beyond.

i am thinking about buying a copy of your program, but i am wondering if i can load it on more then just one computer? my guess is no, but i am wanting to load it on my desk top at home where it is warm and comfy and then also load it on the shop computer, where it is far from home cold and dirty :shaking:

i am thinking about buying a copy of your program, but i am wondering if i can load it on more then just one computer? my guess is no, but i am wanting to load it on my desk top at home where it is warm and comfy and then also load it on the shop computer, where it is far from home cold and dirty :shaking:

No problem. You are fine with what you are asking.

Here is a link to our official statement:
http://www.2020softwaresolutions.com/forums/showthread.php?t=212

If you have any questions, we are here all day long to help. Best to call us at 1.651.257.8715 or email: support@bend-tech.com

Thanks,
Cris

http://www.bend-tech.com/images/bendtech_banner01.jpg

We do not run specials very often so this won't last long.

We have put together a great bundle to handle your fabrication projects:

Purchase Bend-Tech PRO for $275.00 and add the Bend-Tech SM (sheet metal and plate) module for only $50.00 more. Save $225.00 off of list and $100.00 off the bundle.

Call us at 1.651.257.8715
or
Order from our store: Store Link (https://www.2020softwaresolutions.com/shop/home.php?cat=249)
https://www.2020softwaresolutions.com/shop/home.php?cat=249
There is a $10.00 shipping charge that you will find in the initial price. $275.00 + $10.00 = $285.00. Make sure you select the SM module for the $50.00 special. You can find the SM module special after you "Buy Now" under "Edit options".

Thank you!

Link describing Bend-Tech PRO: http://www.2020softwaresolutions.com/bt_pro.htm
Link describing Bend-Tech SM: http://www.2020softwaresolutions.com/bt_sm.htm
http://www.bend-tech.com/images/bendtech_banner01.jpg

.

is this MAC friendly yet? also how much for the simplest version for tube work

is this MAC friendly yet? also how much for the simplest version for tube work

Sorry, no MAC version yet. Many customers running Bend-Tech on MACs, however, they are using MS Windows on the MACs.

Bend-Tech EZ goes for $69.00 + $10.00 shipping. Great way to start, EZ customers get a $59.00 rebate to move into a bigger product later on.

Have a great weekend,
Cris

Sorry, no MAC version yet. Many customers running Bend-Tech on MACs, however, they are using MS Windows on the MACs.

Bend-Tech SE goes for $69.00 + $10.00 shipping. Great way to start, EZ customers get a $59.00 rebate to move into a bigger product later on.

Have a great weekend,
Cris

SE or EZ is $69??

SE or EZ is $69??

Thanks for the catch. EZ is $69.00. I changed my previous post.
Thanks again.

just ordered the combo on special, great deal, thanks

Several orders leaving here daily.

Thank you!!!

Offer is still running; Bend-Tech PRO for $275.00 and add Bend-Tech SM (Sheet Metal) for only $50.00 more.

We are continuing to run the promotion. We continue to stay humble as our business grows.

Thank you!!!

.

How much to add Bend-Tech SM (Sheet Metal) to my current Pro?

How much to add Bend-Tech SM (Sheet Metal) to my current Pro?

PM Sent

Is the promotion still on? Thinkin this gonna be good for me.

Also isthe bendtech sm compatable with my plasmacam cnc table?

Is the promotion still on? Thinkin this gonna be good for me.

Yes, decided to run it for a little while longer.

Also isthe bendtech sm compatable with my plasmacam cnc table?

Yes, Bend-Tech SM creates dxf files that can be read into your programming system.

I've been using the SM add-on for a few weeks now. IMO it is much easier to create parts than using the Torchmate CAD or the PlasmaCam software I've been using. You can export the SM files into Torchmate CAD or PlasmaCam to create the tool paths and cut.

Still trying to figure out the whole bends and slots & tabs but seems like a great software package!

I just found this customer review of Bend-Tech. I remember he said he did something, but I guess I never looked for it.

Bend-Tech Pro Tube Bending Software - YouTube (http://www.youtube.com/watch?v=dt_1WbdICUM)



.

Jumped on this deal!

Hopefully my ordered becomes un-queued soon.

Jumped on this deal!

Hopefully my ordered becomes un-queued soon.


I was out of town last week. Looks like the guys took care of everything for you. If you need anything else, just drop an email to support@bend-tech.com

And Thank You for the business!!!!!


Cris

The special is still going on.:)

I already have BT pro I think I might have the version 4 so how much to add SM and upgrade to the newest BT pro?

Shipped to 98223

I already have BT pro I think I might have the version 4 so how much to add SM and upgrade to the newest BT pro?

Shipped to 98223

$145.00 + $10.00 shipping. This gets you the 5x PRO upgrade and the SM module.

anyone post a video of them taking parts from fabcams software into sheetcam to make tool paths? im on the fence putting down money for fabcams software as it looks well put together but want to see how well/easy it will be to make files i can use with my CNC system.

thanks

anyone post a video of them taking parts from fabcams software into sheetcam to make tool paths? im on the fence putting down money for fabcams software as it looks well put together but want to see how well/easy it will be to make files i can use with my CNC system.

thanks

Do you want me to send you a dxf file that you can load into your CNC software?

Do you want me to send you a dxf file that you can load into your CNC software?

sure!... id like to test things out. i dont mean to be a pest but nothing sucks more than buying software that doesn't get used.

i do everything in autocad 2012 and have used it for 15years but at KOH a few guys were really giving me a ear full of how much faster i could get stuff done using fabcam software. so once taxes are taken care of im thinking ill give things a try.

$145.00 + $10.00 shipping. This gets you the 5x PRO upgrade and the SM module.

Thanks I'll be ordering next week

The special is still on. Bend-Tech PRO (tube assembly design and bending calculations including tube fish-mouthing) and Bend-Tech SM (sheet metal and plate design, includes unfolding and assembling with your tubing) for only $325.00 + $10.00 shipping.

.

We still have the PRO and SM special in place.
$275.00 for PRO and add only $50.00 more for the SM (sheet metal) module.

We have had a few customers ask about bump bending.

(sorry no sound)
Bend-Tech bump bending - YouTube (http://www.youtube.com/watch?v=prtUdKKYWBQ)

price please.
95963

We have had a few customers ask about bump bending.[/url]

Cool, thanks.

price please.
95963

PM Sent

You will receive a download when you order and a cd will be sent shortly after.

A customers design. He has Bend-Tech PRO, SM and HD

Bend-Tech PRO or SE Deluxe - YouTube (http://www.youtube.com/watch?v=xZbIHdYIYoY)

http://www.bend-tech.com/images/bt_assy_deluxe.jpg

How much longer is the package deal going to be available? I have to wait for the end of the month before I can purchase it.

The sale is still running. Thank you to those that have taken advantage of this offer. Your business is always greatly appreciated.

Cris

.

we still have the pro and sm special in place.
$275.00 for pro and add only $50.00 more for the sm (sheet metal) module.

what a deal!!!