PDA

View Full Version : RE 3-link


AlmostNothing
10-06-2005, 06:35 PM
Anyone out there running the new Rubicon Express 3- link set up on their rig that WHEELS it?

If so what's your opinion? Strong? Crappy? What?

Thanks in advance,

Donny

under_psi
10-06-2005, 09:11 PM
http://jeepsunlimited.com/forums/showthread.php?t=646936&highlight=link+shipping

before someone else more 'direct' does...

Carlos Garza A.
10-06-2005, 11:17 PM
This TJ belongs to a friend and he said it basically works the same... He can't see much difference offroad. Check the pics...

http://www.jeeperos.com/foros/attachment.php?attachmentid=44580&stc=1
http://www.jeeperos.com/foros/attachment.php?attachmentid=44581&stc=1
http://www.jeeperos.com/foros/attachment.php?attachmentid=44582&stc=1
http://www.jeeperos.com/foros/attachment.php?attachmentid=44583&stc=1
http://www.jeeperos.com/foros/attachment.php?attachmentid=44584&stc=1
http://www.jeeperos.com/foros/attachment.php?attachmentid=44580&stc=1

?????
10-07-2005, 02:44 AM
I think I would shoot the guy that put that muffler on like that.

CartsXJ
10-07-2005, 07:25 AM
I think I would shoot the guy that put that muffler on like that.

Definately, we just finished putting that "upgrade" to my buddy's TJ, he already had the 4.5" long-arm. Not a bad setup for those who just want a bolt-on system. Though his exhaust is full custon now, moved the CAT to right in front of the skid-plate and the muffler sits inside the skid-plate and the tail-pipe went through three evolutions at the muffler shop:shaking:. They would bend one up, he would flex it up, bend the tail pipe and bring it back. I think they finally got it. We'll find out next weekend, how it preforms at paragon.

GoingOffRoading
10-07-2005, 09:32 AM
http://jeepsunlimited.com/forums/showthread.php?t=646936&highlight=link+shipping



I go to JU for my tech too :flipoff2:

I'm running 3 link on my ZJ and I'm not a big fan of it. I like how RE integrated allthread into the trilink so you can adjust the center of the axle. That truss looks ugly as hell... IMO if you're looking to do long arm, go with 4 link but I'm sure this kit would work just fine (after all RE makes some top quality products).

KRISKYK
10-07-2005, 10:34 AM
save your money and 4 link the orignal likes you have in the rear....i did this during my one ton swap and havent looked back since....

Carlos Garza A.
10-10-2005, 07:55 AM
I think I would shoot the guy that put that muffler on like that.

I agree... :flipoff2: