I did a search & didnt find anything..

What are all of you fullsize Bronco guys using for headers with the 460 swap???..Will headers for a 400 work??..

Im building this Brimco with no money or Id go with the WAY over priced L&Ls...

try looking over here these guys have talked about 460 headers but i cant remember the details
http://www.broncotech.com/cgi-bin/ultimatebb.cgi?ubb=forum;f=6

Nope..........400 is 351m and cleveland size 460 only shares 429.

Buy them once, go L&L :grinpimp:

460/429 car headers may work. the 429/460 was available in t-birds, torinos, etc. during the early-mid 70's. they will likely hug the block more than truck headers, but you can solve this problem with a mini starter. i would look into those before you hand over the cash for L&L's. they are very nice headers, though.

when I swapped a 460 in my 78 F150, I went over to a local Performance shop and picked up some Headdman Headders that fit perfectly. I can't say they were the best quality headder I've ever had but, they did go in flawlessly.

What year bronko ...I have an 81 f150 and i run a 460 and used a set of headman headders i bought for 150.00 brand new and have lots of room even with a stock starter.JEGS has these for 135.99 for an 80through96 f sieries truck and they should fit the 70ds bronko also (not much difference in frame)However i dunno about the older little bronco though I dont beleave u would put a 460 in one of thouse anaway...My headmans dont leak either with flowmasters....

Its a 79 Bronco..Heres the truck...Yes its the ex TTC Bronco from 98

http://img.photobucket.com/albums/v137/MUDDOG4X4/TTC%20Bronco/img74.gif

Buzz are you sure??...I ran the 400 manifolds on my 76-150 with the 460...

Also Im not going to spend that much cash for L&Ls & I dont have the cash for them...I may just clearance the frame to get the manifolds to work on the pass side...Dont know yet...Im getting itchy to get it done...This is the only thing holding me up to get it running..

It looks like you know Randy Thomas, he should be able to hook you up.

Dan

Yes...Iv been dealing with RT for well over 10 years...Hes looking for other headers for me than the L&Ls

Like i said run the headmans for 150.00 thats cheap and they work..

Its a 79 Bronco..Heres the truck...Yes its the ex TTC Bronco from 98

http://img.photobucket.com/albums/v137/MUDDOG4X4/TTC%20Bronco/img74.gif

Buzz are you sure??...I ran the 400 manifolds on my 76-150 with the 460...

Also Im not going to spend that much cash for L&Ls & I dont have the cash for them...I may just clearance the frame to get the manifolds to work on the pass side...Dont know yet...Im getting itchy to get it done...This is the only thing holding me up to get it running..

Nope 4oo headers will not bolt up to 460.

Randy was never really into 429/460's, doubt he has any goodies around.

If you are just looking to borrow a set to fire it up, I might be able to help ya......:smokin:

BTW - I've been wheelin with that bronco, nice Ford:)

Thanks Buzz..Randy said Corey has the headers off the motor that was in the Bronco just laying around...So I might be picking them up...Just waiting on Coreys sloww butt to get ahold of me...


Anyone have the part # on the headman headers??...I cant find them in the catalogs..

Randy loves big blocks...LOL..

http://performanceunlimited.com/photos_staff/79bronco.html

& his 527 CI Shelby Cobra....LOL...

http://performanceunlimited.com/wallpaper_vehicles/cobrarace.html

Did ya get the 460 that was in it ? You Must come to Winter" Buzzfest" :grinpimp:

Buzz I wish but no...Just a stock 460 for now till I get back to work...Im putting it back togeather with spare parts I have laying around...Heres how I got it from Corey..

http://img.photobucket.com/albums/v137/MUDDOG4X4/TTC%20Bronco/Aug11042.jpg

http://img.photobucket.com/albums/v137/MUDDOG4X4/TTC%20Bronco/Aug11012.jpg

& how its sitting now but without the front clip...

http://img.photobucket.com/albums/v137/MUDDOG4X4/TTC%20Bronco/Sep08012.jpg

:( No way............you must have got it Real cheap. He wanted next to nothing for it complete.:eek:

Lmao....Cost me more in gas to go get it than what I paid for the Bronco...LOL..I should have maybe $800 to $900 into it when Im done...LOL...I just have alot of extra parts laying around to use..Like the 460,C-6,205,D-60s front & rear,fuel cell racing buckets....Thats about all it needed...

If ya need any more goodies, lemme know..............:grinpimp:

funny you should mention that Gold bronco of Randy's. A friend, Ron bought the remainder of that bronco with no motor for $500.00 at Jefferson Car show at this springs car show. He is now running the 79 bronco running gear, with a cab and shortened, doors and front clip from that old bronco and bobbed box on it, 460, beadlocks.

I have a set of 80-86 460 L and L's that Im not using if those would work for your application. Maybe randy can cross reference them and see if they would work.


in pieces of making a new ride
http://offroadworld.tenmagazines.com/gallery/mpcrewcab/137533.jpg?SSImageQuality=Full

heres the pic of Rons current ride

http://offroadworld.tenmagazines.com/gallery/WIChapter/141090.jpg?SSImageQuality=Full

I was wondering what happend to the "Time Machine"....I never got to see it in person but I have video of it...Any more pix??...Id love to see the build up on it As Im sure Randy would...

How much for the L&Ls???...Like I said Im way broke ....

Well if it isn't MR.Show-no go from FORDtruck world :barf: :barf: :barf:

Nope, the 80's L&L WILL NOT fit........:(

Does the EFI & Carb 460 heads have the same exhaust bolt pattern? L&L headers fit on the EFI heads?

Buzz lets not start this again I built a truck for show and I have several more for play so why not let this die but if you feel the need to keep it up so be it. So let bygones be bygones. Also I will so if I can come up with some cheap headers. Mike

Buzz lets not start this again I built a truck for show and I have several more for play so why not let this die but if you feel the need to keep it up so be it. So let bygones be bygones. Also I will so if I can come up with some cheap headers. Mike

No fighting in my thread bitches....Take it private or leave...

Like i said run the headmans for 150.00 thats cheap and they work..


Still waiting...ANYONE have a parts# for me????

Well i looked through the headder part in the JEGS catelogg and found ford F series 460 headdmanns and there was a part number next to it..

I bought Mad Dog headers for my crawler. 460 fenderwell, 2" primarys, 3.5" collector, thick flanges. With my motor in stock location they cleared everything, including 4 shock but i'm not using BB body. At 12" setback fit real good. I have 35s with no lift and might have had tire clearance problems at full stuff and turn. One nice feature is that they were $325 delivered. Another guy on Bronco board installed with body and was pleased with them. If you cotact him tell him Jim (hssss) Hankins refered.
"Mark Delcamp" <markmaddog@yahoo.com>

Well i looked through the headder part in the JEGS catelogg and found ford F series 460 headdmanns and there was a part number next to it..

So your saying that the F-150 headers will work on a Bronco?...Im in the same boat as TBO right now

yes, same front clip, most everything is the same

please dont waste your damn money on cheap ass headers, youl regret it....it will sound like a pulpwood truck every few months until they rust through and it will sound like shit all the time

I think Ill go cheap now till I get back working & then spend the money on good ones..

I love mine no leaks no rust holes....150.00 bucks,JEGS/Headdmans

i just got a set of dynomax headers for my 400 only $190, they looks sturdy. i love to show off under the hood now. my buddies has a set for his 460 and love it.