PDA

View Full Version : Will 88' Manual hubs fit a 92 Trooper

Berg
10-12-2005, 09:59 PM
Found a set of manual hubs on a 88 4 cyl trooper.. will they fit a 92?


thanks
Bansil
10-13-2005, 03:15 AM
yes,
Te fronts are the same 17 spline 10bolts up to 2001 or 2002....check your spline count and go for it.
Indyguy
10-13-2005, 06:14 AM
Maybe. '88 was still one of the transition years between use of the front 8 bolt and front 10 bolt, so a Trooper of that vintage could have either axle. Obviously only the 10 bolt hubs would be of use to you. So, before you buy anything I would definitely suggest doing as Bansil said and checking that they are 17 spline units.
Independent4x
10-14-2005, 07:57 AM
wrong.

88+ will work no issues.
Indyguy
10-14-2005, 10:19 PM
wrong.


maybe... with all of the 'use a part until it runs out' that Isuzu is known for, I wouldn't completely rule out the possibility of an '88 with a front 8 bolt. Probable? Hardly. Possible? Possibly... so it does not hurt for him to check before buying.:p
88bronzetroop
10-15-2005, 01:46 PM
I have an 88 trooper that we bought new. I was built in Nov. of 87. Could i possibly have an 8bolt front instead of a 10bolt. It is an 88 because it has the 2.6 and we originaly bought it in may of 88. thanks.
Indyguy
10-15-2005, 03:42 PM
Could i possibly have an 8bolt front instead of a 10bolt.

Probable? Hardly. Possible? Possibly

Count the splines on the end of the axle: 17 splines = front 10 bolt.