BIG_BLAZER86
10-15-2005, 02:23 PM
(605487) FORD 60 REAR 1992-93 1/2 E-350 VAN SARW - FULL FLOAT
Would this be a good axle for the rear of my XJ, has anyone ran one.
Would this be a good axle for the rear of my XJ, has anyone ran one.
|
BIG_BLAZER86 10-15-2005, 02:23 PM (605487) FORD 60 REAR 1992-93 1/2 E-350 VAN SARW - FULL FLOAT Would this be a good axle for the rear of my XJ, has anyone ran one. rjlougee 10-15-2005, 07:08 PM I'm totally not sure on this, but I thought Ford went to the Sterling axle on all the 3/4 ton and greater stuff since about '90? I like a Sterling axle, but there are some limitations with it. Joe masterbeavis 10-15-2005, 08:43 PM I havent run that exact axle, but for the most part, that rear 60 will do alright back there. Is it a 30 or 35 spline axle? gilraine 10-15-2005, 08:55 PM I'm totally not sure on this, but I thought Ford went to the Sterling axle on all the 3/4 ton and greater stuff since about '90? I like a Sterling axle, but there are some limitations with it. Joe in the trucks, they did.. vans, you still get a dana rear.. it's 30 spline i think.. rjlougee 10-16-2005, 08:12 PM Cool, thanks fro the info. I'm going Sterling on the buggy, mostly 'cause it's free. Joe TheJuice 10-16-2005, 09:22 PM in the trucks, they did.. vans, you still get a dana rear.. it's 30 spline i think.. yes, vans were still running them. some are dana 61. they should all be 30 spline in the years since about 1977 IIRC. this one might have the hole for the sensor for E40D as well. I run a D60 from a 1978, like it alot so far. bearfoot_25 10-16-2005, 10:06 PM You do know that the Van Rear is about 5 inches wider than the truck rear dont you?? | |