|
coyote33 10-19-2005, 05:02 PM As usual, I want to try something fun and different. I have a 89 Chev 1/2 ton truck with a EFI 305. I want to try an experiment and see if I can put a 302 EFI out of an old 89 F-150 I have. I know wiring issues arn't a concern but I am sure computers, bell housing etc may be. Anyone ever tryed this project? Love trying new inventions :) Juztyn00 10-19-2005, 07:03 PM a ford into a chevy?! you might want to put your firesuit on for this one :mad3: lagrange151 10-19-2005, 07:06 PM :mad3: FORD YOU! MOTHER FORDER:mad3: coyote33 10-19-2005, 08:29 PM LOL, I DEFINTLY am not a Ford guy at all. Just been having a bad go of SBC,s these days and thought I would try an experiemnt. :) Evan03 10-19-2005, 09:15 PM computer and wireing is an issue. id think youd need to atleast upgrade to a 5.0 setup along with painless wiring kit and mustang brain box maybe do something alittle difrent but stay with the small block chevy and build a MPI 383. coyote33 10-19-2005, 10:16 PM I would tend to agree. I do have a nice 350 with a 4-bolt main. Top is from an 87, block is from a 74. I combined the two to work with the TBI set up. Might be easier to re-built it. The old thing works and runs nice, just she seems to not hold much oil pressure and smokes more then it should. mudslinger99 10-20-2005, 09:37 AM I could understand putting a Chevy motor in a Ford but not the other way around :shaking: GMCTruxrule 10-20-2005, 01:14 PM Just plan on changing motor mounts, or at least fabricating some, you will have to get an adapter to use the chevy tranny, or at least use a Ford smallblock transmission. Not to mention wiring, computer, radiator, and on and on and on..... | |