I am planning on doing a SAC to my '03 taco eventually and am starting to accumulate the parts needed.I have a guy locally who has a D44 outta a '79
Cherokee.From what I have read it is about 2" too wide on each side.Here is my question:

Can i buy this axle and have 2"cut off of both ends and be able to use axles and stuff for a Waggy?
The reason I am asking this is because I am really having a hard time finding a non-vacuum Waggy axle here in the rust belt.This is about the closest I have have come to date and am wondering if I should jump on it or should I hold out for a waggy?

Thanks in advance,
~Scott

You Can Grind The Welds Off The Inner C's And Then Shorten The Tube ,then Weld Them Back, Making Sure To Set Your Angles Back To The Correct Specs.

I am planning on doing a SAC to my '03 taco eventually and am starting to accumulate the parts needed.I have a guy locally who has a D44 outta a '79
Cherokee.From what I have read it is about 2" too wide on each side.Here is my question:

Can i buy this axle and have 2"cut off of both ends and be able to use axles and stuff for a Waggy?
The reason I am asking this is because I am really having a hard time finding a non-vacuum Waggy axle here in the rust belt.This is about the closest I have have come to date and am wondering if I should jump on it or should I hold out for a waggy?

Thanks in advance,
~Scott

You might try searching www.car-part.com I've found many parts on that junkyard data base. If not I know where several axles are here in my area, and I'll be coming through your area (I-80) in about 3 weeks when I go home for Thanksgiving. I could maybe drop an axle off for you. You can check out my Tacoma SAS on my website at www.CornfedSuspension@cox.net or email me with tech questions at CornfedSuspension@cox.net

David