Help Identify This Power Steering Box

[MIBinder]

If you go to reply #8, #9, and #10 of the following thread there is a picture of a rear facing pitman Saginaw power steering box. It looks incredibly like a Scout II box except that it mounts on the INSIDE of the frame rail. According to the thread the box is an International item. I would love to use this box on my coil sprung 67 Scout 800 but I cannot positively identify it. Do any of the guru's here know what this is and where I can get my hands on one? I am currently at a standstill...help.

http://www.pirate4x4.com/forum/showthread.php?t=137903&highlight=inside+above+frame+steering+box

Thanks,
Mike

[Diesel Smoke]

If you go to reply #8, #9, and #10 of the following thread there is a picture of a rear facing pitman Saginaw power steering box. It looks incredibly like a Scout II box except that it mounts on the INSIDE of the frame rail. According to the thread the box is an International item. I would love to use this box on my coil sprung 67 Scout 800 but I cannot positively identify it. Do any of the guru's here know what this is and where I can get my hands on one? I am currently at a standstill...help.

http://www.pirate4x4.com/forum/showthread.php?t=137903&highlight=inside+above+frame+steering+box

Thanks,
Mike

Post 6 is a Scout II box, the 8/9/10 post isn't it mounts to the wrong side of the frame to be a Scout II box.

[BLK Scout 800]

F-250 inside
F-150 outside

My truck is inside 3/4 ton 4wd 1978
My scout is outdide 1/2 ton 4wd 1978

The first pic is IH the rest are ford

[ihojeff]

It's a 2wd 70's Travelall or pick up. I have a couple on the shelf. PM me if interested. I posted on JI also.

[TheCopperCowboy]

http://www.wildhorses4x4.com/29.asp

Take it down to the F-100 Steering Box Conversion. It should work in your application and, in most cases, a dropped pitman arm would not be required. You can find these for a song at the Pick-N-Pull. :smokin:

[Ronnie Scout]

It's a 2wd 70's Travelall or pick up.
Here's a pic of a '74 100 2wd PU box....outside the frame. I also recently took a good look at a '71 1310 2wd...outside the frame. Did IH also use an inside-the-frame box, as Jeff is saying?

[ihojeff]

Did IH also use an inside-the-frame box, as Jeff is saying?

Yup. Already sold Mike the box. He should have it by now. Here's a pic of a 1971 1010 Travelall with the steering box on the INSIDE of the frame.

[Ronnie Scout]

So...did the '69-73 1010's use the inside box, and everything else outside, or what other factors determined it?:confused:

R:)