5.13 yukon gears. Richmond mini spool (also have spiders)

Full width (~67" wms) Ford 8 lug with F250 flat top knuckles and dual piston calipers.

Solid 1/2" axle tubes with weld on Cs.

Comes with two sets of factory spicer axle shafts, all ujoint caps welded in.

I also have the control arms I made, minus the spherical joints. These arms are 2 x .25" DOM with a 1.25" threaded inserts grafted to the ford C arm.

This axle was a 75-76 style with five lug drum brakes that was rebuilt a year ago with the 8 lug parts from a 78 3/4 ton.

The axle is located in Corvallis, OR. $600

May consider parting out if I can get most of the parts sold at once.

Knuckles $100
8 lug spindles/hubs/brakes $200
housing $300
spool $50
shafts (2 sets) $50
Radius arms w/7* bushings $100

pmed ya

pmed you as well . Wondering if it is still available?

PMs sent, still available. Now located in Vancouver, WA.

top

Everything is still forsale

lockouts ?

I'll take the spool if you will sep.

Shafts aswell if they will fit a 78 D44 housing.

is this drivers drop or was it changed? caster? camber?

Todd, I have 2-3 sets of factory ford, 1 set of warn(standard), and 1 set of waggy drive slugs. What do you need/ what are they worth?

Brink, I haven't parted anything yet, let me find the spider gears first and then I can let the mini spool go. I need to hang on to the shafts until the housing sells, just in case someone wants the whole axle.

budgetbuilder, drivers drop, everything is factory. This is all factory assembled parts. Actually, all the most desirable factory parts(best knuckles, brakes and housing)

Thanks for the interest!

If you do part it out. Im interested in the gears. Thanks!

Spool and carrier? if so im in for it...

Housing with gears/carrier $300. I don't want to seperate gears from carrier/housing.

Brink has dibs on the spool, I still need to find the spider gears and swap them in before I sell the spool.