TJ shock relocation

[In the open]

Just did the REBB and the rear drivers side shock almost hits the lower spring perch. At full flex it will hit. I don't want to weld on a new one. Does someone make a bolt-on relocater for the lower shock mount?:confused:

[bnine]

JKS and Nth do for sure.

Cheaper to just trim the perches for that lift, and less strain on the shock mount. Relocators also shorten the shock by about an inch.

[Haole]

Depends on how you remount it. Don't know if your using the bar pins or not, but I busted mine so I just relocated the whole shock by frenching in a F250 shock tower into the frame. Mounted the bottom mounts right to the back side of the spring pad.

[kjp98TJ]

just trim the perches.