|
odee 10-30-2005, 06:29 AM Working on putting 4.11 gears in a 9" for a friend. When the ring is in and backlash set the inner part of the ring is touching the nose bearing housing. Are some cases cut different for this or are the gears cut on the inside to clear? NetBSD 10-30-2005, 02:59 PM mine was doiung this, i was told to grind some away but i didnt, i just adjusted everything till it was right and it has about 1cm of clearence welndmn 10-31-2005, 10:27 AM Yup, you need to grind it, its very common Lars915 10-31-2005, 10:44 AM X2. Easy to do. | |