|
Brad 03-18-2002, 07:45 PM i got a 4.3 outa a 89 s10. from what i remember, the 4.3s use 350 components like the rods and pistons. are they the EXACT same? i need to rebuild mine and it seems that the 350 rebuild kit is cheaper than the 4.3 kit and all i would do is sell the cam and lifters and buy the ones for a 4.3. im trying to keep this as cheap as possible. any ideas? rochog 03-18-2002, 08:14 PM I just did mine and gotthe kit for 160.00 from a friend at a speed shop in town and I thank that the pistons and the rods are te same. Brad 03-19-2002, 12:17 PM Originally posted by rochog I just did mine and gotthe kit for 160.00 from a friend at a speed shop in town and I thank that the pistons and the rods are te same. what does that price include?? mudtruck44 03-26-2002, 10:31 AM The rods are the same but the pistons are diff-pin location- you'll have to find out if the engine is a w engine or not i.e roller or non roller its the 8th digit of the VIN. Most parts will fit a 350 though. Hope some of that helps. | |