PDA

View Full Version : Mark VII Fan Morphed To Scout II Shroud

TheCopperCowboy
10-31-2005, 06:52 PM
Had a few request for this one. I played with the morphing last winter because I could. First off, there is a clearance issue with the water pump pulley with the SV engine. I came up with an idea to move the radiator forward, seal off the filler cap, and use an inline filler with pressure cap. there shouldn't be any problems with non International engine swaps. This is a two speed fan and would pin a cat against the grill. No trimming was done to the shroud and I use construction notch plates, 1/4" nuts & bolts, & rivets to hold in the Mark VII fan in place. I had build pics, but I think I lost them when my camera puked the memory chip. :smokin:
http://www.pirate4x4.com/forum/attachment.php?attachmentid=212887&stc=1&d=1130809544
http://www.pirate4x4.com/forum/attachment.php?attachmentid=212888&stc=1&d=1130809544
http://www.pirate4x4.com/forum/attachment.php?attachmentid=212889&stc=1&d=1130809544
http://www.pirate4x4.com/forum/attachment.php?attachmentid=212890&stc=1&d=1130809544
http://www.pirate4x4.com/forum/attachment.php?attachmentid=212891&stc=1&d=1130809544
R290
10-31-2005, 07:41 PM
For use lazy folks:D

http://www.pirate4x4.com/forum/attachment.php?attachmentid=212887&d=1130809522
http://www.pirate4x4.com/forum/attachment.php?attachmentid=212888&d=1130809522
http://www.pirate4x4.com/forum/attachment.php?attachmentid=212889&d=1130809522
http://www.pirate4x4.com/forum/attachment.php?attachmentid=212890&d=1130809522
http://www.pirate4x4.com/forum/attachment.php?attachmentid=212891&d=1130809522
TheCopperCowboy
10-31-2005, 08:27 PM
Thanks! I haven't quite mastered the "open in new window" cut & paste. One of these days........:cool2:
Mechanos
10-31-2005, 08:54 PM
Ken, it easy......
When you get through uploading your files, go to the Attach Files box in the Additional Options portion of the page. There you will see the list of files you attached. Hover over one and right click, and select "Copy Shortcut". Then click on the http://images.pirate4x4.com/forum/images/editor/insertimage.gif button above the text editing box. When the dialog box opens, right click in it and select "Paste". Hit "OK".

Now repeat that for each addtional image you attached.
TheCopperCowboy
10-31-2005, 10:09 PM
You make it sound so easy. I'm going to print your reply and tape it to the computer. Thanks! :smokin: