|
: odometer cable, nv4500 to L/cruiser dash gavstonka 11-01-2005, 02:13 AM hey boys what the hell am i going to do about the speedo cable... any sugestions on what to use for connecting the nv4500/np205t-case up to the L/cruiser dash. :( what have others done....... :confused: Medusa 11-01-2005, 07:37 AM Simply go to a speedometer shop and have them make you a custom speedometer cable --SAE on one end and Toyota on the other end. If memory serves the speedometer end uses a 23 mmm connector and the NP will use a 5/8 x18 thread. Just "let your fingers do the walking", locate a reputable speedo shop and they will know what to do. I had one made this past summer and it cost about $25. gavstonka 11-01-2005, 08:01 PM cheers, that the easy solution hey. LukeZero 11-02-2005, 05:02 AM Jack- what speedo shop do you use? it seems that in the Midwest there are no speedometer shops anymore. Apparently when we stopped doing state vehicle inspections, headlight alignment, speedometer calibration, etc is now a lost art. Thanks, Luke Medusa 11-02-2005, 07:28 AM There are 3 or 4 speedometer shops in Portland, OR. I use the following: Speedometer Service & Instrument NW Front Ave Portland, OR 97210 - 1301 (503) 227-5567 They are outstanding folks and I bet they will ship. Give them a call MNPoser 11-02-2005, 08:19 PM Used these folks.... Made me a cable to go between the Atlas and the Toyota speedometer... NEVADA SPEEDOMETER 878 MARIETTA WAY SPARKS, NV 89431 Phone: 775-358-7422 Fax: 775-358-7488 OnTheSpot 11-02-2005, 09:01 PM There are 3 or 4 speedometer shops in Portland, OR. I use the following: Speedometer Service & Instrument NW Front Ave Portland, OR 97210 - 1301 (503) 227-5567 They are outstanding folks and I bet they will ship. Give them a call x2. They made me up a custom speedo cable at a reasonable price. Good little shop to work with. | |