Vanco brake kit specials.

[VancoPBS]

This special is for any hydroboost or vacuum booster sold by us. You can visit www.vancopbs.com and see the kits we have. If your vehicle isn’t there call for a custom kit. Custom kits are not much more then standard kits and sometimes cheaper (Chevy trucks are almost always cheaper).

All kits have a 6-month unconditional money back guarantee and come complete with everything you need. In some cases a power steering pump may be needed if you’re going with the hydroboost.

Special is pretty simple. 10% off any kit. 20% off any kit if you take before and after video of your vehicle stopping. The extra 10% will be credited to your credit card. You must inform me you plan on taking the video so I can put your invoice in a separate file.

You can PM, call, or post any questions you may have.

[nickdcj7]

I'm running a d60/14bolt setup on a YJ, with hydro winch, agr pump, and I want to go hydro assist on steering in the near future. Would I still be able to use your hydroboost kit with all that? If so, shoot me a price. thanks.

[VancoPBS]

I'm running a d60/14bolt setup on a YJ, with hydro winch, agr pump, and I want to go hydro assist on steering in the near future. Would I still be able to use your hydroboost kit with all that? If so, shoot me a price. thanks.

If the AGR pump can handle it then yes, if not I can reccomend a pump that will. The kit is 795.00 (Ram assist makes it cost more). Take the 10-20% off from there.

[nickdcj7]

Can the ram assist ports be plugged until I need them, or will i need to rig something up to bypass that until i set up the ram assist?

[VancoPBS]

There is no plug. We machine the hydroboost to allow up to 3 times the fluid to go through the hydroboost. Rams use more fluid then a typcial hydroboost allows through it. So we hi-flow the hydroboost out to allow the amount of fluid you need. You can't tell anything was done to the hydroboost, it's all internal.

[rustynuts]

is there a difference in porting for hydro assist vs. running full hydro and two full hydro setups (rear steer)? will you be able to flow enough fluid through the hydro boost and not see any decrease in performance with two cylinders used. assuming a high flow/pressure pump is used?

[89yjguy]

Hey van,
Just wanted to let you know I bought your hydroboost kit for my yj.Can't wait to put it on and send you a video of it. I'll let you know how it goes!
Thanks,
Jon.

[VancoPBS]

is there a difference in porting for hydro assist vs. running full hydro and two full hydro setups (rear steer)? will you be able to flow enough fluid through the hydro boost and not see any decrease in performance with two cylinders used. assuming a high flow/pressure pump is used?

I swear I answered this. No difference, we overkill the hi-flow. It'll work fine.

[nickdcj7]

Just ordered a hydroboost kit for my YJ. Van really knows his stuff. The before and after video should be interesting...

[Spawn_X]

hey buddy, how long is this valid for? i got a perfect rig for it and have spoken to you on several random occasions, but can't get to this for a little while, but everything is being set up for it.

also, question.. i have 25" steel braided lines in the front, will i still be ok? and my buddy, docfranco on offroadworld.net and pirate, mentioned something (can't recall exactly) about having issues with his high flow pump and hydroboost from you. said that steering was sucky when you were hard on your brakes?? or that's what i understood.

also, how much more volume would you say the m/c you're using (corvette, right?) is than the stock dodge/dakota one? my brakes feel like they are not being pushed out all the way, not enough volume and pedal goes to the floor (bled it many random times). its a single caliper 44 front and drummed 9" rear.

thanks :D

[VancoPBS]

Good for a few weeks, not quite decided yet. May wait until it hits page 3 and let it die. Once in ahwile we run into problems, but we solve them all. I am sure Doc has had his prolem fixed, I remember something about it. I never rest until a problem is solved.

I don't see where your lines would matter. Volume on the master is about the same, if you need more volume we have bigger masters we use.

[Spawn_X]

thanks. i'm about to mount the hydro-assist (tom's stuff). once that's done, i'll stop by the shop to talk to ya. :D

[RocknTJ]

Just put the order in and will be sending the video tape soon.


James T

[Stuman]

Will you sell the Hydraulic lines separately ?

I am interested in a set that will fit an 83 CJ7 with o-ring fittings

PM me a quote ?

[VancoPBS]

PM sent