PDA

View Full Version : What Year Is This Motor Out Of

nate691023
03-20-2002, 08:48 AM
suziki motor
G13B-140919
1298 CM3
G13B
S-3

NEED HELP THE 1.6 WAS BAD
THE GUY GAVE ME THIS MOTOR TO GO WITH THE 1.3
I THANK THE 1293 CM3 IS A 1300 OR 1.3
NEED TO KNOW WHAT I HAVE TO DO TO MAKE IT WORK IN MY 1988.5 OR 88.5 SAMURIA
:beer: :beer:
UZI 9mm
03-20-2002, 12:00 PM
Originally posted by nate691023
suziki motor
G13B-140919
1298 CM3
G13B
S-3

NEED HELP THE 1.6 WAS BAD
THE GUY GAVE ME THIS MOTOR TO GO WITH THE 1.3
I THANK THE 1293 CM3 IS A 1300 OR 1.3
NEED TO KNOW WHAT I HAVE TO DO TO MAKE IT WORK IN MY 1988.5 OR 88.5 SAMURIA
:beer: :beer:

gah.
DUDE!

"SUZUKI SAMURAI"
1298 cm3= 1,298 cubic centimetres=1.3 litres=1300 cc=79.2 cubic inches.(which coincidentally, equals 4 rather angry hampsters...)
which year? the "88.5" or the "1988.5" :D
okcrawler
03-20-2002, 02:31 PM
As I recall, the 1298 makes it an EFI motor ('90 or later). The pre EFI was stamped something over 1300 cc (130x CM3).

The main differences are:

A few less cc's, higher compression, little more aggressive cam :). Did you get the EFI computer, TBI & manifold with it?

The only big issue with making a blubber motor out of it is the mechanical fuel pump. There is no lobe on the EFI cam! You'll have to run an electric fuel pump or install the older cam/head. (I believe the EFI head still had the casting for the pump, but there is no lobe on the cam to drive it....).

Obviously, intake manifold may be different, but you can put your old one on the new motor. Everything else should bolt right up....

Oh yes, you'll need your old distributor...

Beyond that, look to see if your acc pulley (crank) is on with four or five bolts... '94 or later is five (very rare, and a kicker for doing a 1.6 conversion, but cost's ya when you buy a timing belt :D )!
0ILBURNER
03-20-2002, 03:32 PM
Originally posted by okcrawler
As I recall, the 1298 makes it an EFI motor ('90 or later). The pre EFI was stamped something over 1300 cc (130x CM3).






1324 comes to mind.....
nate691023
03-20-2002, 03:40 PM
oilburner youare right i found out that it is a 1.3 and it has cm3 on the side of it. anyone want to buy the thing from me $600.00 +shipping OBO (OBO) will take less make a price and i will tell how every what i thank . i have to come up with $1300 to get a new motor for the sammy