The 4.3 is out of a 00 astrovan with 43K on it.

The 4l60e/241 are out of a 94 suburban. The tranny only has a few thousand on the rebuild.

I have the origional wiring harness and PCM with the 4.3 and i also have the howell harness and a PCM from a 96 4.3 to bypass all the problems....both PCM'S and harnesses come with the motor!

If you're buying it for a YJ then i will throw in all the exhaust system with it....otherwise it has the stock manifolds.

Will also throw in the 231 from a early 90's S-10 with the deal



2000 obo


Will seperate....Make a reasonable offer!!

I may be interesed in this motor and tranny. I just need to do a little research to see if this will work for my 95 YJ conversion project.

After checking into this I realized that this engine is too new. The newer engine have more CA smog requirements. So I'm goning to have to pass. Sorry.

But 750 is a little steep, how about you sell the 231 on ebay and sell the rest to me for $450.

Dan, 916.600.1945

After checking into this I realized that this engine is too new. The newer engine have more CA smog requirements. So I'm goning to have to pass. Sorry.
where did you get your info? curious because I am thinking of swaping one of these into my yota. Pm me back so we don't steal the thread.

bump

Bump...

which drop is the tcase? I am not to familiar with late model chebby stuff.

they're both driver side drop

any offers?

is there a tcase that will bolt up that will allow passenger side drop (without expensive adapters and modifications)

What kind of rebuild was it, who did it, what parts were replaced, what kind of warranty does it come with, and is it still valid?

not 100% sure, but using the same adapter for a 700r4 and it will adapt to whatever 27 spline t-case you want.

might be intrested, looking for any trades? I have a ton of chevy fulsize parts.

500 bucks. Theres an offer. are you interested in an trades I have a ton of stuff.

I might be interested in the motor. How much?

PM's sent

Do you still have that motor and trans?

still have everything...

ttt

I need the motor for the longblock only. Are you willing to sell the motor without the harnesses and computors. If so how much? 818-535-0131

interested in motor ,computers and harnesses. pics?

Emailed ya.

I need the motor for the longblock only. Are you willing to sell the motor without the harnesses and computors. If so how much? 818-535-0131


Tim,
What do you need the long block for, did you blow up that motor already????
How's everything going anyway?

Jeff

My motor has been overheating since day one. I thought it was because of the fan not being big enough or the radiator having air, but we recently figured out that the head is blown. I don't know if that was the problem all along or weahther one of the other problems I had caused it. I hope that it was the problem all along and that when I get a new motor or rebuild this one that my overheating problems will diapear. The exhaust compresion is blowing into the water. So it still runs great. It just gets hot fast.

Sorry for the hijack and I'm still waiting for a reply:)

ttt.....trades for ???

:bounce::bounce:


1000 for the motor and harness/computer
600 for tranny
150 for the 241
100 for the 231