|
Berg 03-22-2002, 12:09 PM I have some diamond plate on my Cruiser that I am going to remove and check for crap under there. I saw some flush type fasteners that someone used to attach their plate and remove it easily. The fastensers I believe were stainless and funky screw-locking type that did not stick out much. Anyone on the board such an animal? Thanks John Smith 03-22-2002, 12:48 PM I believe you are looking for rivnuts. Jason M 03-22-2002, 02:30 PM Sounds like Druz fasteners to me. http://www.jegs.com/photos/674MSA06550.jpg 1/4 turn to lock and unlock... Dave67cruiser 03-22-2002, 06:56 PM I used 6-32 stainless steel button head screws. They look like pop rivets from a distance, or maybe that's just my poor eyesight. I like them cause you can remove em easily if you have too. Also when I put the diamond plates back on I coated them with a waterproof sealer for boats that I bought at West Marine. Figured if their sealed up so water can't get behind them I won't have to worry about rust later on. Berg 03-23-2002, 12:20 AM [QUOTE]Originally posted by Jason M [B]Sounds like Druz fasteners to me. http://www.jegs.com/photos/674MSA06550.jpg Where do you get the Druz?? I did a search and zippo came up?:confused: Thanks fj40guy 03-23-2002, 07:14 AM Originally posted by bennett Where do you get the Druz?? I did a search and zippo came up?:confused: Thanks Dzus Web Site (http://www.dzus.com/) Image is from Jegs Catalog (http://www.jegs.com) www.pegasusautoracing.com (http://www.pegasusautoracing.com/) is another source for them, but their catalog is not online. Still good folks to deal with. Tom :usa: | |