Im looking to lift mt 85' ford f 150 4wd the truck sits off level in the front so i am going to put 4 inch springs in front and 2 inch blocks in rear do i still need a drop pitman arm and radius arm brackets. it will actually only be a 2 inch lift but level out the front of truck if anyone has some info please reply back

If your going to do a lift, do a SAS. I spent an ass ton of money lifting my 96 Bronco, and it's real nice, but I wish I would have gone with a SAS. If your going to stick with the ttb, then you will need all of the drop down brackets for the front, and I would go with a drop pitman arm. I bought extended brake hoses, but my stock brake hoses were the same exact length (13" for the flexable ruber hose). For the rear, if you use new F-250 leaf springs, it will give you a 3" lift without any blocks (I used F-250 leafs and a 3" block to make my rear sit leavel with the front 6" lift on my Bronco). You may want to concider extended radius arms, they work like charm. Good luck!