rustinh1
12-04-2005, 06:35 PM
2000 4 door XJ Limited, 4.0, 89,XXX miles, automatic, power everything, Silver exterior with Black leather seats. 242 t-case. Daily driver.
LIFT:
RE 3.5" Superflex lift with adjustable uppers and lowers, full leaf packs in the rear. 3/4" spacers in the front, Rusty's (greaseable) 3/4" lift shackles in the rear.
EXTRAS:
High pinion Dana 30 in the front, MJ Dana 44 with ZJ disc brakes in the rear. 285/75/R16 TrXus MT's on Rubicon rims, new as of mid-March. Oil pan skid, t-case skid, gas tank skid, lower control arm mount skids (axle end), AJ's Offroad 2x2 rock rails ,and a Dynatrac Dana 44 cover. 4.56 gears in the pumpkins, ARB lockers f&r. Tow hooks in the front, hitch in the back. Custom 4x4 rear bumper with swingout tire carrier. RE Hack and Tap SYE, High Angle Driveline rear drive shaft, front shaft was rebuilt less then 300 miles ago. I'll include set of spare shafts for the Dana 30 (will need new u-joints) and all my spare shafts for the Dana 44 (I think I have one complete set and maybe a third long side shaft), a brand new spare hub, and a spare front drive shaft (needs u-joints all around but would get you off the trail).
I need 11,150 for it. I will send pics as they are requested. This is a great Jeep, but I have recently acquired a new project and need to make some room. Let me know.
Thanks,
Rusty
LIFT:
RE 3.5" Superflex lift with adjustable uppers and lowers, full leaf packs in the rear. 3/4" spacers in the front, Rusty's (greaseable) 3/4" lift shackles in the rear.
EXTRAS:
High pinion Dana 30 in the front, MJ Dana 44 with ZJ disc brakes in the rear. 285/75/R16 TrXus MT's on Rubicon rims, new as of mid-March. Oil pan skid, t-case skid, gas tank skid, lower control arm mount skids (axle end), AJ's Offroad 2x2 rock rails ,and a Dynatrac Dana 44 cover. 4.56 gears in the pumpkins, ARB lockers f&r. Tow hooks in the front, hitch in the back. Custom 4x4 rear bumper with swingout tire carrier. RE Hack and Tap SYE, High Angle Driveline rear drive shaft, front shaft was rebuilt less then 300 miles ago. I'll include set of spare shafts for the Dana 30 (will need new u-joints) and all my spare shafts for the Dana 44 (I think I have one complete set and maybe a third long side shaft), a brand new spare hub, and a spare front drive shaft (needs u-joints all around but would get you off the trail).
I need 11,150 for it. I will send pics as they are requested. This is a great Jeep, but I have recently acquired a new project and need to make some room. Let me know.
Thanks,
Rusty