PDA

: Almost done

SPINY
12-13-2005, 03:14 PM
Here are a few pics of the finished product 3linked and stretched to 101" sorry for the blurry pics but it's freakin cold here .
UZI 9mm
12-13-2005, 03:16 PM
Here are a few pics of the finished product 3linked and stretched to 101" sorry for the blurry pics but it's freakin cold here .

Awesome:D
what kinda range do you anticipate with the propane?
SPINY
12-13-2005, 03:26 PM
I can go two days of wheeling on a tank about 8hrs a day give or take
UZI 9mm
12-13-2005, 03:57 PM
I can go two days of wheeling on a tank about 8hrs a day give or take


Not too shabby at all, really:cool2:

Have you found any probs with running in cold weather?
SPINY
12-13-2005, 04:04 PM
I havent had it out wheeling when it's been cold I had it out today just screwing around it fired right up but it had been sitting in my heated garage . It ran fine though didn't notice anything freezing up .
jader
12-13-2005, 05:01 PM
Looks very good. Could you post up some closer up pictures? I'm interested in seeing how you tied the stock roll bar into the frame, and the back half bars into roll bar. Mostly looking at thinks around back of cab were it was cut off.
Thanks.
mrbogger
12-13-2005, 05:19 PM
Nice ride ( GOOD WORK ):smokin:
OKIE ZUK
12-14-2005, 09:00 AM
Jader, if I can get my camera to download again I'll post my back half.:grinpimp:
tinbeater
12-14-2005, 03:10 PM
Looks good:D Are You going to build a bed or box it in?
SPINY
12-14-2005, 03:33 PM
Not sure what I am going to do with the back deck thought of getting some cargo netting and strapping it down . All I need is some where to throw a strap and a cooler maybe a small tool box I never wheel miles from civilization so I don't need to take much with me .

Jader it is a pertoworks cage I cut off the bottoms of fenderwell mounts and ran a piece of pipe up inside the cage tube and bent it down into the outer frame rail used 1/4" plate on the frame rails plan on gusseting this but I am waiting on a notcher tired of grinding notches plus it is still attached to the body and targa bar in the stock locations and a cross bar between the main hoop .
jader
12-14-2005, 06:14 PM
SPINY:
Thanks for the info. Thats what I was thinking of doing, I mean incerting another piece of tube into stock bar ,then running down to frame.

OKIE ZUK:
That would be great if you could post up some pictures of yours.