Sat:Went to the "MAUL" and did some shopping, Lost my wifes X-mas present(just a DVD):shaking:
Sun: Wrapped some presents with the oldest boy and search for cheap gauges on the net. And hung out here

worked on the wifes cj and here toyota

drank

picked up new trailor

got my half top bulkhead ready to install once i go buy the bolts. mounted my driverside door. found out both window regulators i had for that door were bad:mad3: tacked my show-bar in so the bars actually stayed up. wish i had the money for a real cage:rolleyes: also found out i need to fix my heat now. seems like every time something gets done something else stops working:shaking:

Shoveled some snow yesterday AND today :shaking:

wheeled a little bit today out at the farm, then came home to watch the colts finally lose :flipoff2: :cool2:

also trying to come up with a game plan for a tranny swap while dealing with an upcoming carpal tunnel syndrome surgery on both wrists. Good thing I have air tools.:D

Went and looked at two more properties on Saturday. The realtor chick was too afraid to drive in the snow, so I had to go pick her up. Gave a ride she'll not soon forget getting into and out of one of the properties.:flipoff2: She was crouched down in the seat with her hand over her eyes saying, "I can't look!!!".:laughing: :laughing:

Tried to do some shopping today.... walked around and looked at a bunch of stuff but didn't find anything to buy.

Sat:Went to the "MAUL" and did some shopping, Lost my wifes X-mas present(just a DVD):shaking:
Sun: Wrapped some presents with the oldest boy and search for cheap gauges on the net. And hung out here

WHAT ABOUT THE BEER DRINKING ?:flipoff2:

WHAT ABOUT THE BEER DRINKING ?:flipoff2:

I did some of that! :D

I am not making any real progress on my rig. I did make a x-member. Next week I'll be cleaning the garage then with an entire week off we should see some real... beer drinking.


http://beer.thisdysfunctional.org/forum/attachment.php?attachmentid=4190&stc=1&d=1134960182

http://beer.thisdysfunctional.org/forum/attachment.php?attachmentid=4191&stc=1&d=1134960182

DJ'd for people drinking beer. Went a visited my dad most of today. He'll be gone any day so I want to see him as much as I can before he passes. Listed some Dana 70 4.56 gears on ebay, got my 4.88's for the 60 loaded in the scout for the install tomorrow. I need some weld on shock mounts. Anyone got a good source?

d&c.. or BTF, or the f250 towers

http://beer.thisdysfunctional.org/forum/attachment.php?attachmentid=4190&stc=1&d=1134960182

Josh... is that the AA 32-spline output shaft?

No Scout work this weekend. Took out our new snowmobile and shot some footage for a ski/biling film I'm working on this winter- snomo access backcountry skiing - woo hoo!

WHAT ABOUT THE BEER DRINKING ?:flipoff2:
:laughing: :laughing: I was to lazy this weekend to do that too!

Josh... is that the AA 32-spline output shaft?

Yep. With a 1350 yoke.

Yep. With a 1350 yoke.
That's a 300, isn't it?

I'm getting ready install one of those on my 300..... as soon as I can convince my lazy ass to lay under the Scout and pull the t-case. Hopefully it will be warm enough to do that this week while I have some off time.

I wheeled.......and didn't break anything for a change.

Shopped.. and I'm DONE.

Listened to the NAIA Championship game as my alma matter took their 4th straight national championship. :P Not that I EVER follow football..

Sunday I worked on my Front Bumper (http://www.pirate4x4.com/forum/showthread.php?p=4875889).

Oh.. got a EPROM burner and some chips on the way, too.. ALDL cable should be here this week and I'll get to the bottom of the street Scout's EFI issues.

I played in the snow.

Pictures (http://www.justinternationals.org/Binder-Bench/showthread.php?t=6239)

That's a 300, isn't it?

I'm getting ready install one of those on my 300..... as soon as I can convince my lazy ass to lay under the Scout and pull the t-case. Hopefully it will be warm enough to do that this week while I have some off time.

Nope, it's a 20. I think you should have room to get to all the bolts and you can just pull just the output.

Nope, it's a 20. I think you should have room to get to all the bolts and you can just pull just the output.
A nice thought... but a common misconception about the D300. While the two cases look very similar on the outside.... they are built differently on the inside. You cannot remove the rear output shaft from a D300 like you can from a D20. The 300's rear output has to come out the front side of the t-case, so that means pulling the whole case. That's not that big of a deal since I'm going to install my 4:1's at the same time.

Worked SAT...

SUN, planned on going to hills in SCOUT with rain/snow to cut tree for x-mas. That got cancelled when found out no more permits left:mad3: That was 5th attempt to get a tree without it costing me an arm and leg.....had to finally cough up $49 at tree stand finally to keep roomate happy.

SUN afternoon, put up tree and decorate.......dream'n of wheeling in fresh snow

HAPPY IH HOLIDAYS

http://i26.photobucket.com/albums/c101/scout254/PC1800202.jpg

i rode shot gun for some serious snow wheeling. No work on the scout.

Possible score on a 75 200 travelette 2wd with an olds 455(dead) and t400. So so shape and hack job on the install, but the price is the oh so right price of 'haul it off'.

next winters poject is already congealing. Travelette, shortened to 115", Mopar 452, 727, 203>205, Dodge 60F, Eaton rear.:smokin:

Been busy working. I am a retail store manager who gets used to "clean up" trouble stores and I just took over a mall store location. It sucks! I had just gotten a strip center store back on its feet and was ready to have a smooth holiday away from the rush of the malls, and I have been thrust into hell. This store is a cess pool. Makes wal-mart look like a freaking operating room. Anyways, I did happen to install a new heater valve in my SSII, and I drove by my mom's place and looked at my 73 sitting in the driveway. After the first of the year i'll hopefully have time to get it towed to my new garage to start tearing it down and start its buildup.

I worked 3rd shift. I don't work again until Jan. 6.

Today I am going to clean some in the garage because Verizon is going to install fiber optic to the house and run cat-5 to the other end of the house where the router is.

Moved some dirt and did a little dozing... below freezing :D (well, as below as it gets here).

Ran some errens with the ms.

Sold some Scout parts.

Looked at my IH pile(s)....



thats about it.

Spent the weekend out in the shop being cold.

Prepping a rebuilt IH L-6 for an install in a guys truck.

Had some good times Saturday night with good :beer: and a big dinner with friends. Weather was total crap Sunday, but the motor is ready to go in :D

Spent the weekend restructuring my inventory list on my quickbooks and add'd a bunch of new parts that weren't on it. Now I can actually find stuff when looking up prices and invoicing.
________
Laguna Heights Condos Pattaya (http://pattayaluxurycondos.com)

got the crank and cam into my 345 im rebuilding. then i failed on getting the rear main oil seal in so i quit... that things a bitch!

Moved some dirt and did a little dozing...

How much more dozing until you're done?

Seems you've been moving dirt since the turn of the millenia.. :D

How much more dozing until you're done?

Seems you've been moving dirt since the turn of the millenia.. :D

He just likes to run the dozer... don't let him kid you, he isn't doing any work :flipoff2:

my porta garage blew away in a million pieces over my scout so time to build something a bit more permanent.. Or get another tarp top cover ;)

Worked for half of a day on Saturday morning, then spent the rest of the afternoon Christmas shopping. I got almost finished, and will finish up tonight after work. The evening was spent wrapping gifts, then over to a buddy house to check out his new cop gear, since he's been sworn is as a reserve deputy for Benton County. Sunday headed up to a bust of a gun show in Portland, on the way home stopped at Sportmen's Warehouse, almost bought a muzzle loader. Heard there was freezing rain in my home town, so we headed home. Made it in just before the little winter squal hit and took it easy the rest of the evening.

I had to put off wheeling with a bunch of Italians this weekend.
We had over 450 Military families get flooded out of their homes.
Looks like only about 50 of them will be able to move back in before Christmas.
Most lost everything on the first floor, including the kids christmas gifts.

We now have two additional families living with us.
Makes it feel more like christmas since the kids are out of the house!!

http://images.radcity.net/5773/1252110.jpg
news/video (http://www.afneurope.net/Sigonella/Article.asp?PT=Sigonella+NEWS+YOU+CAN+USE&id=156529)

Torc, what the hell is that avatar? Your dog's got rabies or something:laughing:

Jeff updated your web page with a parts section :eek: :eek: :D

Sat. rode Mt. bike on some :cool2: new trails.

Sun. piss poured rain all day with some hella winds to boot. But Friday night got the other hi-steer arm installed.

next winters poject is already congealing. Travelette, shortened to 115", Mopar 452, 727, 203>205, Dodge 60F, Eaton rear.:smokin:


Eaton?? You been talking to Scott again??:flipoff2:

Shopped a little...

Bought a tree since I have my boys this year...

Making a shopping list for the scout

I guess I forgot this since it wasn't on the weekend...

Wednesday morning I went down to Fort Leonard Wood MO for my brother's graduation. (Army Nat'l Guard) I went down there with my Mom, Dad, and Granddad. I was in a sour mood all 3 days because my dad and I do not get along. I'm not exactly sure what his problem is. He treats people like they are little kids and has to entertain them, and explain everything. Even shit that is common knowledge he explains like he is the only one who knows. I think he is an attention whore. I shared a room with him the first night, then I had to get my own room. He got mad about that. I could go on and on...

Anyway, my brother graduated boot camp and his training as a combat engineer.:usa:

I found out Power-Loc case bolts are left hand threads.

My new $2.65 bolt and $15.00 shipping left Randy's today.