|
: Wheel spacers for hummer rims on D60 ol John Henry 03-25-2002, 12:02 PM I am mounting some hummer rims on a D60 Chevy front. I want to retain the stock tie rod so I am going to need some wheel spacers 1 ½ inch. So the question is Where do I get them and how much am I gonna have to spend :question: :question: TIA PS the search didn’t Cleary answer my question WOLF359 03-25-2002, 12:19 PM easiest way would be to trade your single wheel hubs for dually hubs. Everything lines up fine then. check my website, I have some tech on it there. Tim. ol John Henry 03-25-2002, 12:52 PM Damn I was afraid you were going to say that. Well if can find a set Ill probably do it. Here’s what I have found so far #1 dually hubs #2 Local Machinist #3 www.samsoffroad.com <img src="http://www.samsoffroad.com/Product%20Photos/2.jpg"> #4 www.aimind.com <img src="http://64.49.196.9/images/products/adapters/img/adapt8-8.jpg"> #5 www.wheelspacer.com <img src="http://www.wheelspacer.com/images/adapter.gif"> MT 03-25-2002, 02:46 PM I plan on cutting the center lug pattern out of the wheel and then usinga piece of 9" x 1/4" pipe that is 3" deep to center the lug plate in the middle of the wheel. Just my .02 Regards MT The Rockslut 03-25-2002, 03:05 PM Originally posted by MT I plan on cutting the center lug pattern out of the wheel and then usinga piece of 9" x 1/4" pipe that is 3" deep to center the lug plate in the middle of the wheel. Just my .02 Regards MT :eek: :eek: :eek: :eek: :eek: :eek: God Bless Texas MT 03-25-2002, 03:13 PM It's not that big of a deal Rock Slut! http://4wdfactory.homestead.com/hummerrim.html Regards MT MT 03-25-2002, 03:17 PM One more time http://4wdfactory.homestead.com/files/Dcp_0684.jpg The Rockslut 03-25-2002, 03:24 PM HOLY PICTURE SIZE BATMAN Hayraker 03-25-2002, 03:39 PM Originally posted by cornfedred Damn I was afraid you were going to say that. Well if can find a set Ill probably do it. I'll swap you a set | |