YJ high clearance crossmember??? [Archive]

DE Jeeper

10-03-2001, 06:44 AM

I got a Bayou Geep (www.bayougeep.com)plate. I had Glenn send me the plate unfinished because of my motor tranny swap, I had to customed it. I also built a custom tranny mount. He can set it up for any stock application. I would also recomend a 2" bl because there is not that much room a in a YJ tunnel. A custom 1.75" MM lift helped my drive line angles too. It reduces the drop from 3" to 1.25" and it worth the expense for a better break over angle. I think Tomken makes a YJ plate too, but they don't really advertise it.

Check out more pics here: http://albums.photopoint.com/j/AlbumIndex?u=1372718&a=12931317&f=0

http://albums.photopoint.com/j/View?u=1372718&a=12931317&p=48517317&Sequence=0

http://albums.photopoint.com/j/View?u=1372718&a=12931317&p=48517314&Sequence=0

[ 10-03-2001: Message edited by: DE Jeeper ]


Pirate4x4.Com > Brand Specific Tech > Jeep - Hardcore Tech > YJ high clearance crossmember??? PDA : YJ high clearance crossmember??? NE-RokToy 10-02-2001, 08:56 PM My dad has a YJ and is looking to gain a little clearance underneth. What are the options??? Mayhem. 10-02-2001, 09:02 PM Bayou Geep Bayou Geep (http://www.bayougeep.com/pages/products/skidplate.html) They make a great low profile plate DE Jeeper 10-03-2001, 06:44 AM I got a Bayou Geep (www.bayougeep.com)plate. I had Glenn send me the plate unfinished because of my motor tranny swap, I had to customed it. I also built a custom tranny mount. He can set it up for any stock application. I would also recomend a 2" bl because there is not that much room a in a YJ tunnel. A custom 1.75" MM lift helped my drive line angles too. It reduces the drop from 3" to 1.25" and it worth the expense for a better break over angle. I think Tomken makes a YJ plate too, but they don't really advertise it. Check out more pics here: http://albums.photopoint.com/j/AlbumIndex?u=1372718&a=12931317&f=0 http://albums.photopoint.com/j/View?u=1372718&a=12931317&p=48517317&Sequence=0 http://albums.photopoint.com/j/View?u=1372718&a=12931317&p=48517314&Sequence=0 [ 10-03-2001: Message edited by: DE Jeeper ]