Pietro
12-22-2005, 09:12 PM
-85’ Yota front axle, completely rebuilt with all OEM bearings and seals except the diff, has cruiser vented rotors, Allpro highsteer arms, and wheel spacers
-88’ + 85’ rear axles, haven’t been touched, will need new backing plates and brakes
-Tranny/Tcase from 85’ carbed truck, no idea if good or not
-Tranny/Tcase from 88’ EFI truck, worked great when pulled
-Miscellaneous driveshafts with and without CV’s
-Allpro highsteer linkage using cruiser TRE’s, steering stabilizer kit
-5” front springs, shackles, bushings, flip kit, DO NOT HAVE front frame tubes/hanger
-4” rear springs (56” long), shackles, main spring and shackle hangers, U-bolt eliminator
-Rear bilstein shocks, I believe 5100 series, new upper and lower mounts
-Have steering box for crossover steering, extra master cylinder, take em’ if you need em’
$1600 for all plus whatever miscellaneous parts you need that are laying around
Selling because I have no time and project is too far from where I live
Items are located in Milford, PA which is 1 hour+ north of Paragon Park in Hazleton
Derek_Bonpietro@yahoo.com or 845-742-3906
-88’ + 85’ rear axles, haven’t been touched, will need new backing plates and brakes
-Tranny/Tcase from 85’ carbed truck, no idea if good or not
-Tranny/Tcase from 88’ EFI truck, worked great when pulled
-Miscellaneous driveshafts with and without CV’s
-Allpro highsteer linkage using cruiser TRE’s, steering stabilizer kit
-5” front springs, shackles, bushings, flip kit, DO NOT HAVE front frame tubes/hanger
-4” rear springs (56” long), shackles, main spring and shackle hangers, U-bolt eliminator
-Rear bilstein shocks, I believe 5100 series, new upper and lower mounts
-Have steering box for crossover steering, extra master cylinder, take em’ if you need em’
$1600 for all plus whatever miscellaneous parts you need that are laying around
Selling because I have no time and project is too far from where I live
Items are located in Milford, PA which is 1 hour+ north of Paragon Park in Hazleton
Derek_Bonpietro@yahoo.com or 845-742-3906