I have a set actually 3 35 spline rear 60 axles- make me an offer- and the poison spider diff cover how does 40$ sound? and 4:56 gears new used 1 year- with pattern and back lash available how does 85$ sound- and 8 lug rotors and outers if needed 85$- I also have a th-350 trans 4 wd shifts great no leaks 250$ - and a set of 6 Old style and 4- 8 lug bead lock wheels 15" rim 36" size radials how does 900$ sound for rims and tires - And i will sell my 38.5 15" swampers i have 5 on rims if i can get 900$- make me offers- i want a set of 17" rim 42 swampers minimal off-set no bead locks for mine- Jess

Does the diff cover happen to have the 4-link tabs? If so I'll take it.

Kevin

Hey Jess,

I am also intersted in the cover.

One more question........how much to lengthen a rear driveshaft, one of yours that I bought last year and never installed. Finally getting to the project, money or time...one or the other. Anyway, stretching and may I have ball park $ to stretch the shaft?

Thanks, Teach

Info on the 8 lug rotors?

Interested in the rear guard if it will fit a D70. Also intersted in the rotors and outters.

The cover is just standard no 4 link provision- the 8 lug rotors are from a late modle ford front application- i can snap a pic if your interested- lengthning a shaft aprox 65-90$ range depending on tube thickness- make me offers- Jess

here's a rear pic- Jess

lol Didn't see the pic when I posted.

Email sent.

So what outters do you mean?

By the axles, do you mean a complete rear axle, or just the shaft? If you have complete axles, I will take one of them.

Dima

I have the complete housing but its bent- if you want the bearing hub assemblies and rotors just call me -we will work it out- Jess

Pic please on rotor/outers

hope this helps- Jess

Interested in the axle shafts. Whats their length and what manufacturer?

I have 4 actually two are dutchman and 2 are moser- all are necked down to fit a boared spindle on a ff 60- Jess

How much for the dana 60 4.56s shipped to 93704?

I have 4 actually two are dutchman and 2 are moser- all are necked down to fit a boared spindle on a ff 60- Jess
Whats the length of the Dutchman set and how about $150 + shipping ?

there 34 end to end - i'll take 150 for those- give me a call- the 4:56 's i'll ship for 85$- call me- any other offers- Jess

what are the length of the Mosers.
Bottom Dollar?

Bostonyj7@yahoo.com
(No PMs)

there the same length- 34" and there 150 shipped for both- Jess

bump - give me a call on these if you can- thanks Jess

Whats the axle flange bolt pattern? how much for just the hubs shipped to 25181? Thanks.

its regular chevy-ford 8 lug- the hubs only 60$ - Jess

I still have two axles and a diff cover and a 4:56 ring and pinion nearly new- Jess

its regular chevy-ford 8 lug- the hubs only 60$ - Jess

I mean the bolt pattern for the actual axle flange. Ive discovered there were many different axle flange bot patterns. I have a set of alloy axles and they were the wrong bolt pattern for my hubs, which is why I need different hubs. Thanks.

Well if you say so- i orderd these for a full float 60 and they sent me the axles- no talk about bolt patterns on the axle- but i will measure it tomorrow for ya- do you want it on center ? Jess

I still have my 36" radial cepeks on 8 lug bead locks - any takers? and my 38.5 swampers on regular chrome wheels both are 15" rim- anyone ? Jess

yeah on center. I appreciate it. My hubs I have currently are 8x3.75, but ive also found 8x3.96, 8x3.98, and 8x4.00.

Hey Jess, do ya take PayPal? I'd still like to get that 4.56 set if available.

Freds40 i do not - but kidjethro may be able to get the transfer for me and we can wwork it out that way possibly- 92 s - i will double check tomorrow- Jess

I can do Pay-Pal for Jesse. My Pay-Pal is Carpe_diem76@comcast.net.

the hubs i have are 3.920- Jess

Those should be the ones I need. You said $60? Is a money order ok? Tell me where to send it and I'll get the money sent out ASAP.

A money order is fine- send it to 7245 clark road - paradise , ca 95969 - Thanks Jess

I sent the money order out this morning. So its in the mail. Thanks again.

I hope you have an adres to mail those to ya in there also - on another note i jsut got this all wrapped up going in mine next week - Jess

Hit ya with an email. I want the PSC Diff Guard.

Interested in those other 35 spline shafts. How much you want for them?

If you still have the guard let me know.