Intake reccomendations

[cryptonik420]

Just got me a 670 Truck Avenger for my Bronco. Im looking for advice on an aftermarket intake to match up well with that carb. It's going on a stock 351W, that might get a mild buildup at a later date. Also, any venders on here selling intakes? I'd rather purchase from a vender on this site then anywhere else.

[Fordtrucks]

Mu buddyhad the same setup on his 351W and used a Wiend (holly) type intek and worked awsome.If you like I can ask him if he wants to sell?

[wetnsloppy4x]

I'd reccommend the Edelbrock Performer RPM Air Gap. It has good velocity at low RPMs for a stock motor and will breath deeper at higher RPMs if you decide to warm the motor up.

[Blown]

Edelbrock Performer but not the RPM. It will have better torque for a wheeler at lower RPM than the Performer RPM.

[Fordtrucks]

I run the performer on my 460 and it works really god and i have a big cam also.

[97XEB]

Check out the Weiand Stealth.

Great low end through mid range torque, and the ability to rev up to 6800 - which is probably way more then you'll ever see, even if you warm up that 351!! The Stealth supposedly also has a waterjacket running across the back 2 ports, and the Edelbrocks don't. This means the stealth should provide a little better cooling. Plus, since Weiand and Holley are essentially the same company, those two components will probably be better matched.

Good luck, and keep us posted.