boxerhips
01-07-2006, 07:41 PM
Will a LT230Se work in a 1995 D-90 ? I just pick one up to replace one that has no high side. It has no speedometer drive, but it looks like you could just install the one from the LT230T case. Tim
|
boxerhips 01-07-2006, 07:41 PM Will a LT230Se work in a 1995 D-90 ? I just pick one up to replace one that has no high side. It has no speedometer drive, but it looks like you could just install the one from the LT230T case. Tim SeaRover 01-07-2006, 11:47 PM You just need to swap the rear output assy from you're old tcase onto the new case. Very simple swap. There is a cotton washer on there that is a good idea to replace. You need to hook up the speedo to keep the speed sensor in business for you're 14cux ECU. I'm running the SE case in my rangie and love it. Cheers SeaRover 01-08-2006, 12:55 AM there some pics of the output housing swap here: http://nwrovers.com/pics/LT230SE-add-speedo-gear you can see the main difference between the housings in this pic - the SE housing is on the righ, with the casting obviously not accepting the speedo gear. http://nwrovers.com/pics/albums/LT230SE-add-speedo-gear/DSCN0002.sized.jpg | |