usmcdoc14
01-11-2006, 08:59 PM
I started with your typical hated Smith and Wesson Sigma series 9mm pistol shown in its "toy gun" grey finish
http://www.pirate4x4.com/forum/attachment.php?attachmentid=220952&stc=1&d=1135538060
first I fixed the trigger pull problem associated with sigmas here (http://www.pirate4x4.com/forum/showthread.php?t=400180&highlight=sigma) and dyed the frame a different color
as shown here (http://www.pirate4x4.com/forum/showthread.php?t=426060)
http://www.pirate4x4.com/forum/attachment.php?attachmentid=220953&stc=1&d=1135538060
and fabricated a picatinny rail out of an old AR rail.
Well I finished the bitch :evil:
http://www.pirate4x4.com/forum/attachment.php?attachmentid=223995&stc=1&d=1137037743
I was going to Gun-kote or Dura-coat the slide but seeing as i went the cheap bastard rout from the beginning i might as well finish the "theme" :laughing:
Its sprayed with Rustoleum Textured in black and then baked in the oven at 350* for an hour. (same finish as my AK's) It is VERY tough and easily touched up.
That and its like $3 a can :p
I also went the cheap bastard rout with the light.
http://www.pirate4x4.com/forum/attachment.php?attachmentid=223996&stc=1&d=1137037743
it is a LedWave Z-5. and cost me $50 shipped from ebay. Now before you laugh it has a momentary and ON switch that is ergonomic, it uses 2 lithium cells and believe it or not uses the EXACT SAME FAWKING BULB as my surefire :eek: You could put a higher watt Surefire bulb in this bitch if you wished.
I find it quite blinding as is.
http://www.pirate4x4.com/forum/attachment.php?attachmentid=223997&stc=1&d=1137037743
questions, comments, concerns ??
http://www.pirate4x4.com/forum/attachment.php?attachmentid=220952&stc=1&d=1135538060
first I fixed the trigger pull problem associated with sigmas here (http://www.pirate4x4.com/forum/showthread.php?t=400180&highlight=sigma) and dyed the frame a different color
as shown here (http://www.pirate4x4.com/forum/showthread.php?t=426060)
http://www.pirate4x4.com/forum/attachment.php?attachmentid=220953&stc=1&d=1135538060
and fabricated a picatinny rail out of an old AR rail.
Well I finished the bitch :evil:
http://www.pirate4x4.com/forum/attachment.php?attachmentid=223995&stc=1&d=1137037743
I was going to Gun-kote or Dura-coat the slide but seeing as i went the cheap bastard rout from the beginning i might as well finish the "theme" :laughing:
Its sprayed with Rustoleum Textured in black and then baked in the oven at 350* for an hour. (same finish as my AK's) It is VERY tough and easily touched up.
That and its like $3 a can :p
I also went the cheap bastard rout with the light.
http://www.pirate4x4.com/forum/attachment.php?attachmentid=223996&stc=1&d=1137037743
it is a LedWave Z-5. and cost me $50 shipped from ebay. Now before you laugh it has a momentary and ON switch that is ergonomic, it uses 2 lithium cells and believe it or not uses the EXACT SAME FAWKING BULB as my surefire :eek: You could put a higher watt Surefire bulb in this bitch if you wished.
I find it quite blinding as is.
http://www.pirate4x4.com/forum/attachment.php?attachmentid=223997&stc=1&d=1137037743
questions, comments, concerns ??