Ive got a 95 chevy z71 i just finished up doin a sas on it an its got a lot of body roll an i was wondering what sway bar would be good to use? and if you can mount it in the stock location? 8in on 42in iroks

What front axle did you use? What did it come out of? I would reccomend that you use the sway bar that is from the vehicle that the front axle came out of.

PS: I have a front sway bar out of an 87 K5 for sale

i used a HP Dana 44 out of a 79' F-250

Oh ok, I would say go find a sway bar out of the same or similar truck to use. How does it mount to the axle? On the spring plates like Chevys? The job would be easier if you use stuff that is all ready made that you can find in a JY.

You can use your stock 95' model sway bar in the stock location. Just use some small heims and make a link from the swaybar down to the spring plate, or just make some sort of mount on the axle.

Could use the stock bar and make some links, or use the stock bar of the donor axle, and make some links. Got any pics, by the way??

ORU sells one that is kinda pricey but works good. http://www.offroadunlimited.com/ProductCart/PC/viewCat_P.asp?idCategory=219 There was a dicussion on here about 6 months ago about some and there were links to some race car anti roll bars that weren't too much and looked nice, did a quick search but didn't find anything. good luckhttp://www.offroadunlimited.com/ProductCart/PC/catalog/60093l.jpg

yea i got a few pics 454rat i been meaning to get them up on here just haven;t had the time. if you get a chance pm me so ill remember to post them. I dnt; have the stock swaybar it accidently got thrown in the ifs scrap pile. anybody know a good place to get a stock sway bar cheap??

JY

put the shocks on and that will help the body roll problem a little:laughing: