Hello,
I posted on the wanted section with no luck so i thought i might have a better chance here.
Need a few parts for my 70 FJ40,
Door hinges and pins and screws but mainly the hinges,for both doors.
And a heat duct. The piece thats in the middle of the heater and the duct thats mounted to the firewall.
Thanks, CWCruiser

if you don't have any luck here, try it on www.ih8mud.com

i'm going to look at a parts cruiser tomorrow, if i get it maybe it'll have what you need.

I don't know If they're still avail. from Toyota?

If you have trouble finding one, try Profitt's Cruisers.
It has sheet-metal sleeves on each side, w/vinyl as the conduit connecting the two.

You might be able to make your own (galvanized sheet-metal, vinyl, a pop-rivet gun)?
There's has an interesting crimp in the sheet-metal to secure the vinyl, kinda like 1/4" fingers/tabs that go around both inside openings.

You need this piece?

http://www.pirate4x4.com/forum/attachment.php?attachmentid=222153&stc=1&d=1136183225

Yea it looks like it i think,only seen a drawing of it of the SOR website.
#5
Is it for sale?
CWCruiser

Damn. I was hoping you were talking about another piece. I just cut that up for my radiator mount. I really had a hard time cutting it up because I tought somebody might need it but at the last second I said screw it.

Sorry. I was hoping you were asking for a differnt piece that I have laying around.

BTW I got mine from SOR 6yrs or so ago.

well for the heater things i just did that all from home depot, it takes searching but all for the heater section can be made there.

For the door hinges i feel you there i just bought them from ccot. i paid too much and they will probably suck but my 3/8" bolts arent doing the job. Its out there depending as you have only two options

1)ingenuity
2)money

sorry missed it the bolts i use i turned down some delrin bushings in the lathe to work but because of the size difference i opted otherwise

you can buy new bushings from sor for cheap.

I have what you need CWCruiser . you pay for shipping and its yours! ill pm you. Kodi

NORCAL yor PM box is full!!!!!
CWCruiser

i have a related question: where can i get hinge bolts/screws? good originals, not the shiny aftermarket stuff. thanks.

toyota dealer

i have stainless steel dr hinges , hard drs , hatch back , hood , cut up alum fenders,& misc stuff