ive got just about every part to a 83 pickup minus the axle, front driveline, engine, doors, and tranny. anything else is game, dismantled a whole truck today for parts. good cab, no rust at all on it same as bed, make offer. can deliver in colorado area for gas money. anything you need? I need it all gone, make offers!

I need the AC hoses, the heater valve, the EGR valve, and the headlight relay assembly

What condition is the dash in? color? Does the cluster have a tach?

Do you have a header?

need a 79-83 front driveshaft, you said whole driveline was gone... maybe im lucky?

I have the egr valve, i think it had the heater valve on it and i know it had the headlight relay stuff but i need to go look through the stacks of parts for them, ill let you know. Do you happen to have a picture of the relay setup so i have something to go by?

The dash is in awsome shape cept someone tryed to glue one of those carpet dash covers on it and it got ripped off, just a little glue on it is all. its brown and the cluster does have a tach in it.

sorry, no header cause its going on the runner but i do have a few manifolds...

and the driveshaft is going to the sas on the runner, sorry...

Name your prices + shipping and they are yours!

I also have 2 cylinder heads that came with the truck, 1 is a closed chamber and the other a turbo head i believe( was told so, havent checked it out to much)

here's a pic of the relays, this is under the dash I need both the holder and the relays, basically the whole thing cut out with like 3 or 4 inches of the wires left intact.

http://www.thegatts.us/tech/headlight1.jpg

and a pic of the heater valve

well, the pic is huge so go here (http://www.thegatts.us/imgs/heatervalve.jpg)

howbout 40 bucks + ship for the egr, valve and headlight assembly?

do you have the AC hoses?

I dont need the whole dash just the plastic front where the stereo and heater controls are, as well as an ash tray. I also need the hood if its in really good condition. Send me some pics if its still available. I would love to have the bed too but thats a heck of a drive.

the bezel is pending sale right now but if it falls through. the hood is perfect, i didnt even see many rock chips at all. id like to get 100 bucks for it but ill take the first reasonable offer for it. you welcome to the bed if you want to come get it. ill take some pictures of both tomorrow and send them to you. whats your email addy?

I need a passenger headlight surround, and corner lens?
Shipping to 85239?

sorry, parts are already gone...

sorry, parts are already gone...

Update

Ive got 2 cylinder heads, 1 closed chamber and 1 normal ole 22r head
SR5 gauge panel with tach
dashboard assembly minus glove box parts
Complete bed in good shape with good tailgate and 1 taillight
Forged aluminum high compression pistons standard bore with good rods
22R engine block/crankshaft
2 valve covers
2 timing chain covers
set of rod bearings
brake booster without master cyl.
passenger side door
thirdmember without gears/carrier
small parts

Any chance you have an exhaust manofold heat shield for a carb r-22?

anybody want to buy a 5inch superlift for their 79-85 toyota pickup or 4runner? $130 for front springs and 3inch blocks and 5inch steering link for steering box.

send PM