|
jeeper1267 03-29-2002, 05:14 PM Need some ideas for a shifter for the TH350 I just swapped in my '87 Wrangler. I bought a B&M StarShifter but when in park the lever goes so far forward it almost hits the dash. What shifter has everyone else used for this swap with success? Thanks!!!!! Rock Toy 03-29-2002, 06:15 PM I would get an Art Carr shifter. That's next on my list: http://www.off-roadweb.com/images/content/or0501a4_theoutlaw08_small.jpg Old Scout 03-29-2002, 08:25 PM Rock toy ... were? I looked and looked and then just bought a Turbo Action SCS. http://www.jegs.com/photos/91270001.jpg whitefro 03-30-2002, 12:03 AM Originally posted by Rock Toy I would get an Art Carr shifter. That's next on my list: http://www.off-roadweb.com/images/content/or0501a4_theoutlaw08_small.jpg damn i love what u did with ur shifter and gauge setup it looks awesome. i wish i could do that to my heep. :flipoff2: Brackneyc 03-30-2002, 10:57 PM I used a B/M Z-gate for my TH400. Once the center console was removed, I was able to put the shifter in a very comfortable spot. It is a cheap shifter, but works pefectly. Po' riggity 03-31-2002, 02:18 PM I used a B&M ratchet shifter for my auto swap. In retrospect, I should have gone with art carr, but I didnt have the money, so that didnt happen. All In all, Im happy with the B&M, but if you can spare the cash, go with an art carr/winters shifter the first time. Scott ROKTOY 05-13-2002, 06:55 AM Can you tell me why you would prefer the Art Carr shifter over the B&M? Also....what is approx. cost of the Art Carr? Thanks, Jay High5 05-13-2002, 06:29 PM i run a lokar on my th400 Po' riggity 05-13-2002, 08:15 PM Originally posted by ROKTOY Can you tell me why you would prefer the Art Carr shifter over the B&M? Also....what is approx. cost of the Art Carr? Thanks, Jay Well. For me the one and only reason for going with the B&M shifter was the price. I got the ratchet for like 150 bucks. The Art Carr is in the 250-300 range, and thats a bit more money than I had at the time. The Art carr however is more sturdy, and has a better feel to it. Ive driven my friends YJ with an art carr and it does well. I loved it. Scott SVARAS 05-13-2002, 08:30 PM same issue, different aproach..... I just swapped a 700R4 on my Cj7. Any idea how to use the stock linkage with the 700 ???? Actually, my problem is how to make it work, since the tf999 use a diferent lever at the tranny (flat plate v/s "C" type of the 700) Any help, appreciate:barf: :barf: :barf: :confused: :barf: orbitcat 05-13-2002, 08:57 PM I used the Lokar shifter for my 700R4. You can use a similar model for the TH350. Here's a picture before the console went in, but it looks a lot better with the console in. | |