PDA

: 5 on 5.5 lug dana 60?

black&blue
03-30-2002, 12:23 PM
what, if anything, came stock with a rear D60 with a 5 on 5.5 lug pattern? thanks.

chad
Old Scout
03-30-2002, 12:41 PM
Ih P/Us and T-alls can have a "Heavy half" D60-2 SF with 5x5.5.
WideJ
03-30-2002, 02:05 PM
Warn makes a full float kit that is 5 on 5.5 if you want to go that route.
2bit
03-30-2002, 05:07 PM
Originally posted by Old Scout
Ih P/Us and T-alls can have a "Heavy half" D60-2 SF with 5x5.5.

14" drums?FF?
road1will
03-30-2002, 05:11 PM
70s Jeep J20 trucks had SF 1.5" 35 sp 5 on 5.5" rears.
Old Scout
03-30-2002, 05:19 PM
Originally posted by 2bit


14" drums?FF?

stupid newbie look it says 60-2 SF! It has a 2x12" drum
2bit
03-31-2002, 01:48 AM
So the answer is no then,huh ya fawkin hero :flipoff2:
black&blue
03-31-2002, 12:22 PM
old scout,
on the ih trucks, is that semi-floater a 35 spline? if not, then what spline count? thanks for the help.

chad
Old Scout
03-31-2002, 12:40 PM
No it's just like a D44 1.31" 30 spline
jefe
03-31-2002, 09:08 PM
I just finished narrowing and installing a D60-2 (5 on 5-1/2", 4.10/Semi float/1.5"-35 spline axles) from a '73, J4700 to a '73 C104. [It was 64" wide. We cut 5-3/8" off the long side, making it Scout II width centering the pig.]
The '69-73 Jeep Glads and J trucks used the S.F. D60-2 in the model one pop down from the J4800, D60-3 (FF, 8 lug, 31 spline). After'73, all the H.D. rears were D60-3's.
'64-68 Gladiators used a Dana70, FF in the rear of the heavier trucks, no S.F. D60. Interestingly, the one I narrowed had the same size axle tubes as the HD, D44 axles. The 1.5" axle barely fits in there. The axle we converted had a factory Power Lok, kinda cool. Adjustable preload on cones. It was replaced with a Detroit, but we kept the 4.10's. We also used the stock 12" brakes. Yes, 12"x 2". The drums barely clear 15" wheels, but stopping power is very good.
regards, as always, jefe