I somehow need to adapt the line from YJ my slave cylinder to the fitting on the clutch slave cylinder on my '93 Chevy NV4500.

From looking at the female receptacle on the slave cylinder, it appears to be some sort of compression fitting that is secured with a roll pin...

Anybody have any idea where I could find me one of these things?

If I could find some sort of hose with that fitting on one end and some sort of threaded flare fitting or compression fitting on the other end, it would be easy to adapt it to the stock clutch line.

Thank you for your support in this, my time of need,

Jake ;)

Don't all talk at once now... :flipoff2: :D

I found that problem when I was putting in my NP 435 into my 87 YJ I just ordered up a different clutch line with the right fittings on it to fit my external slave, I got mine from NO excuses 1-800-923-JEEP ask Jack he will know. Or you can cut the line and get a flaring tool and get the right fittings you need from a local parts store. Hope I helped...:smokin: :smokin: :smokin: