|
doombug 02-07-2006, 05:19 PM Bought a 99 tacoma x- cab 4banger with a 3" revtek suspention lift and a 2" body lift . It must have aftermarket coils because the front suspention is extended all the way up. Dont really like the way it rides. Maybe it has v6 coils? Any ideas? Thanks Scott Kyron 02-08-2006, 11:37 AM It still has the torsion bars ?? right?? If so they are to "tight" and as you losen them the front will lower Or if you have coil overs you can lessen the preload on the spring Why not raise the rear to match the front? Pietro 02-08-2006, 01:05 PM your current strut is too stiff or allowing too much droop and maxing out the balljoint and upper a-arm take out the spacer that is outside the strut (the one between the strut mount and frame mount) or change the coil if it is aftermarket there are no torsion bars on tacomas regardless of 2wd or 4wd doombug 02-08-2006, 04:06 PM Correct no torsion bars on tacomas, And my problem is not the height it is the ride and the fact that the suspention is all the way up,Still what I think is wrong, Too stiff of a coil spring, Like someone used v6 springs instead of 4cyl ones.Thanks.... | |