well pulled the detroit apart today, nothing wrong with it, allready had the spool so i decided to throw it in the third member....... so i pull the rear detroited third member out (to put the spool in rear and detroit in front) well rockbound is pullin the 3rd member out and there are these strange little chunks of steel............... yeap my fawkin ring gear! :mad: overnighting new gears, the rear is all back together with the spool..... winch is on and mounted, ram is permanantly mounted.......... now set up the rear 456 gears and ill be done untill i break again, which im sure the way things are goin will be soon..... :rolleyes: a few pics to post soon

start off with a good pic..... 9 inch set up with spool

rear 456 gear pieces................

redneck ram,,,,,,,,,,,,,,,,,,,,,,,,

9500hs, didnt have time to run the box to my interior..... too busy fixin my broken shiat!

ill get some better pics of the ram, when im not so busy with the other shiat

So, corect me if I'm wrong... The rear had the broken teeth?

Originally posted by CHOKEu
So, corect me if I'm wrong... The rear had the broken teeth?

Ooop's I just saw the answer... I was correct.

If you are selling that detroit and it is in good condition and would fit my low pinion 3RD member (not sure if the HP and LP are different), I'd consider taking that off your hands for a fair price. PM me if you want.

SeanP

Yea some specs and price, dealer where ya got it etc on the RAM would be nice. Seems like a nice looking piece.:smokin:

Fleckster

the good ol' currie high 9".:rolleyes:

Yeah, I think that it is important to point out that it is a 8.8 ring gear in a Currie HP "9" differential.

I don't think they are designed for the shit you put them through.

At some point you realize you are going to have to cut your losses and get a D60.

I was just like you with my old Toyota axle...I bought every indestructable Birfield and locker I could.....

Finally lost my ass one too many times and cut the cord.

Originally posted by wngrog
Yeah, I think that it is important to point out that it is a 8.8 ring gear in a Currie HP "9" differential.

I don't think they are designed for the shit you put them through.

At some point you realize you are going to have to cut your losses and get a D60.

I was just like you with my old Toyota axle...I bought every indestructable Birfield and locker I could.....

Finally lost my ass one too many times and cut the cord.


ohhh trust ne, way before this happened the 60's are allreadt in the mix........... gathering and scrounging for next year allready... :D

Originally posted by The Fleckster
Yea some specs and price, dealer where ya got it etc on the RAM would be nice. Seems like a nice looking piece.:smokin:

Fleckster

just call (lakerat) MAtt at west texas offroad #915-651-5010

works great.............

Originally posted by SeanP
If you are selling that detroit and it is in good condition and would fit my low pinion 3RD member (not sure if the HP and LP are different), I'd consider taking that off your hands for a fair price. PM me if you want.

SeanP call me 412-414-9046 we can discuss a fair price :D

yeah we just can't get a break, not to mention the studs got stripped out off his wheel spacers!

D60 mmmmmmmmm it better not be missing from my garage!! :flipoff2:

Originally posted by rockbound
yeah we just can't get a break, not to mention the studs got stripped out off his wheel spacers!

D60 mmmmmmmmm it better not be missing from my garage!! :flipoff2:


hmmm yeahh, now that you mention, i forgot bout that 60 just sitting back there :D

Originally posted by badassjeepguy



hmmm yeahh, now that you mention, i forgot bout that 60 just sitting back there :D

Dum dee dum dee dum *Snooping around CJ's garage at 2:00 am* , LOL :eek: :D

friggin JAY at west coast diff, is the shit...... ordered my gears at 530pm my time yesterday............. fed ex knockin on my door at 9 am my time........... now thats what i call next day! should be throwing it in the jeep tomorrow morn..... :D :beer: :smokin:

Originally posted by badassjeepguy
friggin JAY at west coast diff, is the shit...... ordered my gears at 530pm my time yesterday............. fed ex knockin on my door at 9 am my time........... now thats what i call next day! should be throwing it in the jeep tomorrow morn..... :D :beer: :smokin:

Hey Rob, my brother is looking for a decent" TJ tub.. Know of any in your area?

Decent meaning can have some damage, but useable...

ring and pinion set up, just got to throw it in the front, and ill be ready to head to big dogs this friday........... yeeeaaahhhhh....




emmet, no clue where you could get one...(other than a junk yard) i keep loosing more and more of mine, sawzalls have that effect :D

So what brand are the dead gears? :nuke:

Originally posted by Nobody
So what brand are the dead gears? :nuke:

whatever brand currie uses!

Originally posted by Welby


Dum dee dum dee dum *Snooping around CJ's garage at 2:00 am* , LOL :eek: :D

i'm just getting home at 2am from the bars, better come a little later!! :flipoff2:

Originally posted by Emmettology 101


Hey Rob, my brother is looking for a decent" TJ tub.. Know of any in your area?

Decent meaning can have some damage, but useable...

not sure how much he is willing to spend, but I think that fourwheel drive hardware is know selling them!

Originally posted by rockbound


not sure how much he is willing to spend, but I think that fourwheel drive hardware is know selling them!

CJ,

He is looking for a stock steel one that needs work(some dents, etc) It will be for his wheeler so it will get dented anyway.... We have a number for Seachrist salvage near 51/70(I think) that someone on the board gave us. They are supposed to have some.. Keep your eyes open if ya see one in one of your local j-yards, if you dont mind.. Thanks..

Originally posted by Emmettology 101


CJ,

He is looking for a stock steel one that needs work(some dents, etc) It will be for his wheeler so it will get dented anyway.... We have a number for Seachrist salvage near 51/70(I think) that someone on the board gave us. They are supposed to have some.. Keep your eyes open if ya see one in one of your local j-yards, if you dont mind.. Thanks..

keep my eyes peeled,

seachrist got a lot of jeep shit, they always have what I am looking for!

Originally posted by rockbound


keep my eyes peeled,

seachrist got a lot of jeep shit, they always have what I am looking for!
Cool Beans, I will make sure he calls.. They usually have good prices?

Originally posted by Emmettology 101

Cool Beans, I will make sure he calls.. They usually have good prices?

decent! Last time I was ther there was about 3-4 tj's in the yard, but I am not sure if they will part them out, didn't ask!

Rob, the Ram looks sweet.

Glad to hear your back on the road. Sounded like all the problems hit you at the same time...BEEN THERE DONE THAT. :D

Originally posted by Bert
Rob, the Ram looks sweet.

Glad to hear your back on the road. Sounded like all the problems hit you at the same time...BEEN THERE DONE THAT. :D

we aren't on the road, yet, I drove by this morning on the way to school and he wasn't there yet, so it isn't together yet!!

but we got all the parts at least!

Originally posted by rockbound


decent! Last time I was ther there was about 3-4 tj's in the yard, but I am not sure if they will part them out, didn't ask!

nice sig smart ass :flipoff2:

Originally posted by rockbound


we aren't on the road, yet, I drove by this morning on the way to school and he wasn't there yet, so it isn't together yet!!

but we got all the parts at least!

tonight after work, anyone wanna help at 1130pm? only need a pinion seal, it will be in tomorrow morn.....