is it possible to buy something to allow me to retune my TBI system? i have a realy solid setup but w/ a off the shelf chip my rig runs like poop..... i have had a few dyno runs and so far im best off all around w/ my oem chip... any aftermakret chip starts off ok.. then gets richer and richer like silly rich...... i dont want this..... i was hoping to find some where that offers cracked sofwar i can use to burn my own chips or something and tune my TBI..... i did this on a vw i had and it worked great once i got eveything up and runing. i hope chevy stuff is easyer!

thanks!

oh im trying to tune a 1990 suburban w/ a 350 and TBI injectons.....

thanks!

www.tunercat.com Easy to use bin editor...
www.moates.net Supply of adapters, chips, and other free software.http://www.xtronics.com/memory/EPROM.htm Chip burner
http://www.akmcables.com/ Cable to connect laptop to ALDL port
http://www.ttspowersystems.com/diagnostic.htm Recording software can be used 20 times for free, and you can purchase from AKM Electronics also
Good luck, this is the way to do it. I work with guys on TPI, but don't get involved in TBI. I've got a guy using a 7730 ecm with a 468 big block. He sends me data recordings, and I adjust his bin file accordingly. Most for profit guys don't have time to do it right, so do it yourself.