: hard top and poss. onboard air pumps


78cj7-4.3
02-14-2006, 04:54 PM
I am selling the following items which are located in Davis Junction,IL,

a yj hard top the top is ok condition except for the 16" x 2" hole that was cut in the roof by a prior owner could be patched but the real item here is the side windows with sliding lower windows 25.00 takes it
http://i35.photobucket.com/albums/d173/78cj7/ebay%20items/MVC-010S.jpg
http://i35.photobucket.com/albums/d173/78cj7/ebay%20items/MVC-012S.jpg
http://i35.photobucket.com/albums/d173/78cj7/ebay%20items/MVC-013S.jpg

here are two elec. motors with pumps attached these are 1/3 hp 250 psi pumps and have ss tanks already attached can easily be modded for onboard air by simply wiring in a inverter. 100.00 each
http://i35.photobucket.com/albums/d173/78cj7/ebay%20items/MVC-009S.jpg
http://i35.photobucket.com/albums/d173/78cj7/ebay%20items/MVC-008S.jpg

bcrewcaptain
02-14-2006, 08:07 PM
can you get some measurements on the pump/tanks?both if possible...thanks

78cj7-4.3
02-15-2006, 06:17 AM
the round multi-port tank is 9 1/2" round, the pump is 11"x6" overall as assembled is 16"x15"x12"H

the cylindrical tank is 11"x8", the pump is 11"x6" overall as assembled it is 14"x16"x10"

pressure switches are set at on at 80psi and off at 100psi pressure relief valve is set at 180psi

ogerdgonz
02-15-2006, 10:24 AM
I am guessing there in no rear glass for the top then? I have a top but need a rear glass piece.