looking for a set of four junkyard springs, they must be in the stock location cause Im not planning on moving my axle back or forward. any one got any leads? :question: my stock YJ springs SOA aint gonna cut it they are already sagged out.

If you are looking for some drop-in springs that will fit the YJ mounts exactly I think you should use some off a YJ:flipoff2:

you can get some Cj7 rear springs.

ya know what belongs in this thread, that big long list we used to have here of various vehicles spring lenghts and widths. someone should search and post it back up. or better yet, make it a STICKY!

a sticky of useful tech information. that would be sweet.

YJ: 2.5" wide, frnt/rr, 45.5" long, centered centering hole (measured center of bushing hole to center of bushing hole)
70's CJ: frnt: 1-3/4"wide, 39-3/4", rr: 1-3/4" wide, 46" long.
80's CJ: frnt: 2" wide, 45" long, rr: 2-1/2" wide, 45" long
70's Commando: frnt: 2" wide, 46" long, rr: 2-1/2" wide, 56" long (!)
(both ends with centering hole off set)
70's Wagoneer: frnt: 2-1/2" wide, 44" long, rr: 2-1/2" wide, 52" long
(both ends with offset centering holes)
early 70's J trucks: frnt: 2" wide, 44" long, centered holes, rr: 2-1/2" wide, 57" long, centered holes.


here is a little, thanks jefe!

Just get the Waggy springs, you will be better off. And if you dont like the offset then swap out the main leaf for your YJ's, you need to pull the center pin anyways to flip it over.