|
: Info: Dana 44 Front axle shaft lengths, ALL FSJ. Mr.N 02-15-2006, 07:21 PM Info: Dana 44 Front axle shaft lengths, ALL Full Size Jeeps from 1967 and to the last GW. FYI, updating my web page thought I'd share a chart. I've added all the 80's and 90's info. As always info taken from Spicer. http://littlekeylime.com/MrN/images/New_Dana44/Charts/FSJ.GIF JeepManEd 02-16-2006, 06:37 AM Thanks....I use this info alot and it sure helps. Ed Mr.N 02-16-2006, 07:42 PM Thanks....I use this info alot and it sure helps. Ed Glad it helped! fubar73cj5 02-20-2006, 06:29 PM I got a question for you, I have a Scout 44 front and noticed that Warn sells 30 spline outers for them if you bore your spindle to 1.35" but I can't seem to find a hub unless you buy their "conversion kit" for $300. Is it possible to convert to 30 spline outers by just boring the spindle and finding the right hub to bolt up? The outers are the same as the 72-86 CJ 30 spline:confused: I also posted this in the IH section but thought I would try it here. Thanks in advance | |