I am sure this has been asked a million times. Anyone know where to get a chevy tie-rod taper tool. I just broke my old one. I got that one from cal-van tools but they discontinued it. It doesn't even say the taper degrees on it. Even If someone could tell me the taper, it would save me the time of trying to be exact enough in measuring it. Thanks

Right here....

http://www.secureperformanceorder.com/products/getproduct.cfm?CategoryID=8&ClassID=121&SubclassID=565&ProductID=2631

EVEYONE, SAVE THIS AND NEVER ASK AGain :D:D:D

Reamer is 7 degrees (3.5 per side)
Afco Racing $120 p/n 80770
http://www.afcoracing.com/products/getproduct.cfm?CategoryID=8ClassID=121SubclassID=5 65&ProductID=2631
Optional Reamer Sources:
Stock Car Products $80 p/n R8201
http://www.stockcarproducts.com/
Goodson $50 p/n TR-216-2
http://www.goodson.com/scripts/mshop/
Snap On $37 p/n R121
https://buy.snapon.com/

Only $37 from Snap On?That must be a mistake :D

Originally posted by FRIZZLEFRY
Only $37 from Snap On?That must be a mistake :D

Nope, that's about what I paid. When Mike told me Snap-on had them, I thought 'Oh this ain't going to be cheap'.

Snap on price has gone up slightly... $39.25
http://buy.snapon.com/catalog/search.asp?partno=r121&search_type=Part&store=snapon-store

I just bought mine a few days ago from snap on, $60 canadian, delivered right to my doorstep, did my pitman arm in the drill press and it worked awsome, left a better looking taper than my stock arm had, did my lower arm in place with a 1/2 inch drive drill and it worked ok, reamer wants to take a really big bite so it stalls the drill alot.

appreciate the help guys. Sometimes it is hard to get people to give up their sources. See you on the trail.

FYI the snap one one is the cheapest because it sucks the most :D
I have with the goodson one, and it still cuts great!