ok does anyone have a part # for a 1ton tre that has a lefthanded thread? i am getting ready to redo the steering on my jeep and i can get the right handed thread becuase it is used on my d60 but the other side is part of the tie rod. i am wanting the same tre only with the left handed thread. any help? thanks

If you're talking about the 1-18 thread pitch TRE's, there isn't a left-hand threaded one. (That I have ever found.)

J. J.

the normal chev numbers are

http://community.webshots.com/storage/1/v5/0/2/33/32300233Kkewdn_ph
robbed this from this board awhile back, thanks to the origonator

I have not seen a 1-18L TRE either. Good luck. The numbers above are for 7/8-18 TREs.

yeah my buddy own's a napa and he didn't see them either. i was hoping to use the 1" 1ton tre's but i guess the 7/8's will have to do. thanks for the replies.

I posted this in the Chevy section but I thought I'd put it here because this is one of the threads that comes up when you search for "1-18"

Someone just gave me the part #'s that Sky uses for the 1" TRE's

ES2011R, 1ton GM, 1" shank 4 inch long one (77-91 K30 obviously)
ES2064L Left hand Ford 1" shank, 4.75 long (I think 77-79 F250?)

It looks like the left hand thread exists afterall. I'll be picking up these parts sometime soon so I'll take some pics and let you know about availability.

Now I'm just currious if they are both 18tpi?

wow i started this post over 2 years ago

Parts Mike has them on his page too:

http://www.partsmikeparts.com/tre_comparison.htm

wow i started this post over 2 years ago

I know it's old...but it is one of the only threads that comes up when you search for "1-18"...and it never came up with the answer. Just trying to help people trying to search :grinpimp: