axles [Archive] - Pirate4x4.Com

Brandon

03-01-2006, 09:40 AM

really i thought they were sorry..so what are stock? and do stock axles for the 65 come with lockers? mine as them.

what kind? Maybe you should do some research before posting, and a few people have pointed you to the BB - that might work out a bit better if you don't even know what axle you have or if they have lockers. Pull the covers and look inside.

ihochad

03-01-2006, 09:49 AM

Dude, You have been lucky to this point but you really need to do searching and or go to the other buliten board to learn a little before asking these guys for there advise and tech knowledge. This is a forum for the more advanced. I am not trying to be a dick just trying to save you some flaming. There is a ton of info out there YOU just have to look for it and not be lazy.

Oh yeah.. go get Brandon his PICS. He has work to do!

get r done

03-01-2006, 10:24 AM

Brandon

03-01-2006, 10:37 AM

Your 65' scout did not come with 44's - I stand by that

http://www.binderbulletin.org/forums/faq.php?faq=ihc_faq#faq_ihc_faq_1.0

your gonna piss off the one friend you had, dumb fawker

I honestly paid no attention to what was actually under the scout, assuming maybe 27/30 but they are toothpicks not worth of anything larger than stock tires.

ihochad

03-01-2006, 10:46 AM

yea ill get right on that since u guys cant be nice and tell me that im pretty much wasting my time asking u guys so if im lazy for asking ? the maybe brandon should get off his ass and do some research about the 289 exhaust now shouldnt he...and for one he didnt even know scouts came with 44....so leats i know i dont know anything about this at least i dont pretend to know and give false info to some one like brandon did:flipoff2:
Yeah there you go. That's a great way to make your point. First off I don't see Brandon posting about something as mondane as what is my truck worth and what axles do I have.. He has a ADVANCED questions that he was hoping you could take a picture of as you have a truck with the conversion already done. I don't belive he asked for you advise or "hey man how do I do this". If you would have taken the time to do a little research you would have noticed that Brandon's member number is 6. He also has a Toy pick up with a 5.0 ford in it. Meaning he probably doesn't need your advise. As far the the 44, he is mostly right. The Scout did not come with a 44 front until 74 making it a Scout II the rear is most likely a 44 but won't be a flanged 44 and will be 19 spline. You will not have a locker in the front as it is (if it is stock) a Dana 27. You may have a power lock in the rear. So take a deep breath and relax. :shaking:

IHC-6

03-01-2006, 11:09 AM

get r done

03-01-2006, 12:03 PM

Brandon

03-01-2006, 12:06 PM

There is no reason to swap out that rear axle on your toy - it is nearly bulletproof. As for the front the LEAST you'd want to put under is from a SII, not that S80, but being new like it sounds like you are I would stick with toy stuff - forget the scout and build the toy. Once you get done playing get another scout ;)

Check out marlincrawler.com for the toyota stuff.

ih4ever

03-01-2006, 12:12 PM

god, you just gotta love this shit!!!:flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2:

get r done

03-01-2006, 04:19 PM

alright thanks...my buddy is into 4x4 and he is talking about doing the conversion on my toy for me. so i should stick with the toy front to? isnt the 44 wider then the stock v6 toy ?

Brandon

03-01-2006, 04:26 PM

alright thanks...my buddy is into 4x4 and he is talking about doing the conversion on my toy for me. so i should stick with the toy front to? isnt the 44 wider then the stock v6 toy ?

From the sound of you should NOT modify your toy in ANY way. Just drive it, I hate it when people outbuild their driving skills...

A 44 is NOT a 44, they come in many flavors and strengths/lengths. Your Toy IFS rear end is wider than a non-IFS and there are a lot of people competing with that axle and people running 44" tires on it. If you want width, yea you can go to a dana but the next step for a rear would be a 60 - not a 44. The 60 axle is actually the same size as the toy just a slightly different pitch on the spline if I remember right. The biggest thing is the amount of ground clearance the toy axle will give you, plus the aftermarket alloy axles etc along with the dropout 3rd member etc. Maybe you should post in the toy section ;)

I do think you should just drive your toy though, you might be surprised what it can do in stock form. Learn how to drive with it, break stuff and learn how to fix it then do the conversion YOURSELF so if it breaks - you know what to do. It's your rig, and if you are going to be driving YOU need to know how to fix it.. all of it.

SCOUTMAN67

03-01-2006, 04:27 PM

so i should stick with the toy front to? isnt the 44 wider then the stock v6 toy ?

If it's stock, your '65 has a closed knuckle Dana 27 front, not a Dana 44.

Edit: Maybe I'm confused by what you're asking.

-Gary

Creepy196

03-01-2006, 05:25 PM

will my 65 scout 44s work in my 93 toyota? i dont know what side the drive line is on my scout......thanks for the help

You get offended by people saying you're lazy when.............................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................... YOU CAN'T EVEN BE BOTHERED TO LOOK UNDER THE SCOUT TO SEE WHICH SIDE THE FRONT DRIVESHAFT IS ON???

While you're under there you could LOOK at the difs (what a concept). The front should be closed knuckle (crap) and have "27" cast into it. The rear will have either "27T" or "44T" cast into it. You may have powerlocks in the axles. Most only came with a PL in the rear but a front D27 PL was an option. It makes a nice paperweight...

uglyscout

03-02-2006, 07:55 AM

will my 65 scout 44s work in my 93 toyota? i dont know what side the drive line is on my scout......thanks for the help

Maybe you can't find your glasses to take a look for yourself and figure out what kind of axle you have. F'in dumbass!

That has got to be the dumbest question I have seen on here in sometime....

get r done

03-02-2006, 08:30 AM

Urban Wheeler

03-02-2006, 08:33 AM

Sorry guys all i wanted was a few ? answered and u guys started to rip on me so i did it back...so i wanted to sell my scout so i could do a straight axle swap on my 93 but i thought that the axles would work good from my scout to my toy..sorry for making u guys pissed off......dont know alot about my scout..
In your original post you said some guy told you there are 44s under a 65 scout. I was calling that guy an idiot.

Now, how do you edit a thread without having the "edited by" line show up at the bottom?

Brandon

03-02-2006, 09:00 AM

ihochad

03-02-2006, 09:13 AM

dam u guys are assholes.. so wonder everyone says that the pirates are all asshole...and to think i actually defended u guys... but i have meet some nice pirates but for u guys ur assholes.. all i did was ask a simple ? and u guys rip into me...and i know i can fix my truck dumb ass but my buddy has done a couple striaght axle conv. so i thought he could help me jack ass... :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2:
You sir are a complete fawking jackass. You are the person that came into this forum asking questions that either a simple search or easier yet just a peek under YOUR OWN truck would have given you the answer too. Then you insult the one guy that was trying to steer you in the right direction. You say that pirate is a bunch of assholes, but you can see by my member number that I have not been on the site very long, I do know several guys on this site and that helps but if you will also notice with a simple search. I have never started a thread or spouted of stupid questions that I could answer myself. I have aboslutely no probelms on this board. Did you ever think that maybe it is other dumbasses like you that are giving this forum a bad rap???? However after trying to read the gobbeldeegook you right I am sure that would require a slightly higher thought process than you are capable of. Now go give a farm animal oral pleasure :flipoff2:

SCOUTMAN67

03-02-2006, 09:16 AM

get r done

03-02-2006, 10:22 AM

thank u that save me an hour drive to my parents. if i had my scout at my house i would know all that...that u scoutman. :beer:

Harvester of Sorrow

03-02-2006, 10:43 AM

Dude how old are you? Just asking for real...might explain alot...

R290

03-02-2006, 12:22 PM

will my 65 scout 44s work in my 93 toyota? i dont know what side the drive line is on my scout......thanks for the help

I been following this thread and if you read your post you left everyone to ASSume a lot. I would assume a 65 Scout would not be stock anymore and might have D44 front and rear. You said "what side the drive line is on my scout" Seems logicial you could just look, but now we see it's not at your house, again making everyone assume WTF is this guys talking about.

As you can see the "front" drive line is on the right. See how pictures can tell a thousand words. Get a star and post away in the TOY section and you get a lot of questions answered.

You can use Google advance search to the board too.
click here for google advanced search (http://www.google.com/search?as_q=toyota+Scout+axle+swap&num=50&hl=en&btnG=Google+Search&as_epq=&as_oq=&as_eq=&lr=&as_ft=i&as_filetype=&as_qdr=all&as_occt=any&as_dt=i&as_sitesearch=pirate4x4.com&as_rights=&safe=images)

binderbound

03-04-2006, 11:56 PM

dukguy

03-05-2006, 02:26 AM

Dude if you are older than 16 you're a fucking dumbass. Shut the fuck up and start reading like everyone else.

"If you would have taken the time to do a little research you would have noticed that Brandon's member number is 6."

Brandon,I never noticed that you were #6. That kind of makes you pirate royalty doesn't it:flipoff2: .

JJS

03-07-2006, 07:03 PM

posting with down syndrome is a terrible thing that should be avoided.

Shadow man

03-07-2006, 08:06 PM