hey, just wondering, what is the best length to go with. i currently just have a spoa, but later i plan on going to yj's with missing link, what would be the best way to go with brake lines.

also, how well do jy's handle axle wrap. thanks

the yj's will defitnally need a traction bar or some other type of anti-wrap bar........... for brake lines, i'm going to do the yj swap as soon as i find a set of springs, and i'm getting brake lines that are 22" long, not sure what their off of but i'll have the part # in a few days, but the #'s might be different for you sence this is at canadian tire.......
-Mike

Brake lines…
Sami Front -->mid 90's Tracker front RIGHT(21 1/2")pn# ?, or an 83 honda Accord FRONT either side(20")napa# 38673

Sami Rear --> front brake hose for a 90-96 Nissan 300ZX(23 3/8")NAPA part #38688

Originally posted by mud-magnet
the yj's will defitnally need a traction bar or some other type of anti-wrap bar...........

I can't speak for stock 4-pack YJs, but I did a really good job of twisting up a pair of 5-pack YJs in the back of my Zuk. I made a custom 6-pack set of springs for the rear with all 4 leaves from a 4-pack and 2 leaves (1 long, 1 short) from a 5-pack, and they have worked perfectly! They are still soft and flexy, but they have all but cured my axle wrap problems. And it's a lot cheaper and easier than a traction bar. Don't bother messing around with a traction bar until you've tried a 6-pack or two. :) :beer::beer: :)